Sharp DK227N operation manual Specifications, Amplifier, Speaker

Page 35

Specifications

XL-DK227N

As part of our policy of continuous improvement, SHARP reserves the right to make design and speciﬁcation changes for product improvement without prior notice. The performance speciﬁcation ﬁgures indicated are nominal values of production units. There may be some deviations from these values in individual units.

General

Power source	AC 120 V ~ 60 Hz

Power consumption	35 W

Dimensions	Width: 7-1/16" (180 mm)
	Height: 10-2/8" (260 mm)
	Depth: 10-6/8" (273 mm)
Weight	8.8 lbs (4 kg)

CD player

Type	Single disc multi-play compact disc player

Signal readout	Non-contact, 3-beam semiconductor laser
	pickup

D/A converter	Multi bit D/A converter

Frequency response	20 - 20,000 Hz

Dynamic range	90 dB (1 kHz)

Tuner

Frequency range	FM: 87.5 - 108 MHz
	AM: 530 - 1,720 kHz

Amplifier

Output power	RMS : Total 64 W (32 W per channel into 4
	ohms at 1 kHz, 10% Total harmonic
	distortion.)
	FTC : 25 W minimum RMS per channel
	into 4 ohms from 100 Hz to 20 kHz,
	10% Total harmonic distortion.
Output terminals	Speakers: 4 ohms
	Headphones: 16 - 50 ohms
	(recommended: 32 ohms)
	Subwoofer pre-out (audio signal):
	150 mV/10 k ohms at 70 Hz
Input terminals	Audio In (Audio signal):
	250 mV/47 k ohms

Speaker

Type	2-way type speaker system
	2" (5 cm) tweeter
	4" (10 cm) woofer
Maximum input	64 W
power
Rated input power	32 W

Impedance	4 ohms

Dimensions	Width: 5-13/16" (148 mm)
	Height: 10-1/4" (260 mm)
	Depth: 6-15/16" (175.5 mm)

Weight	4.72 lbs (2.14 kg)/each

References

35

Image 35

Contents FM antenna IPod adaptor Remote control AM loop antennaThank you for purchasing this Sharp product Important Instruction Explanation of Graphical SymbolsImportant Safety Instructions XL-DK227NIMPORTANT Safety Instructions Special Note ContentsGeneral XL-DK227NPrecautionsVolume control Front panel Controls and indicatorsSpeaker system DisplayRear panel Remote control Antenna connection see AC power connection seeXL-DK227NSystem connections Preparation for UseAntenna connection Connecting iPod to a TVUse ForOutdoor FM antenna AC power connectionDemonstration mode For UseClose the cover Precautions for battery use Remote controlBattery installation Test of the remote controlBasic Operation XL-DK227NGeneral controlTo change the 12-hour or 24-hour display Setting the clock Remote Control onlyTo readjust the clock To conﬁrm the time displaySupported iPod models Auto power on functionListening to the iPod IPod adaptor connectionIPod playback To insert iPod adaptorTo remove iPod unit To remove iPod adaptorWatching videos on a TV connected to iPod To disconnect iPodNavigating the iPod menus with the remote con- trol Various iPod functions Listening to a CD or MP3/WMA discCD or MP3/WMA disc Playback To remove the discs Press the OPEN/CLOSE button to close the disc trayDirect track search Advanced CD or MP3/WMA disc playbackVarious disc functions Random play Repeat playProgrammed play DiscAbout folder playback order XL-DK227NMP3/WMA folder mode only for MP3/WMA ﬁlesMP3/WMA disc Playback To play back CD-R/RW Procedure to play back MP3/WMA disc with folder mode onRadio TuningAuto tuning Listening to the radioTo recall a memorized station To scan the preset stationsTo erase entire preset memory Memorizing a stationAdvanced Timer and sleep operation Remote Control onlyFeatures Timer playbackAdvanced Features Sleep operation Checking the timer setting in the timer stand-by modeCanceling the timer setting in the timer stand-by mode Reusing the memorized timer settingEnhancing your system To use timer and sleep operation togetherSubwoofer connection HeadphonesCD player Troubleshooting chartSymptom Possible cause ReferencesMaintenance Speaker SpecificationsAmplifier Sharp Electronics Corporation