Daily Use FM, Using the FM Radio, Storing FM Presets

BR20DAB

Daily Use FM

Time - Allows you to set the time and date manually or update automatically from the DAB+ or FM radio broadcast.

Backlight - Allows you to set the backlight time-out from 10, 15, 30, or 60 seconds, or keep the backlight on.

Factory Reset - this will reset all preset values and begin a full scan for DAB+ stations.

Software Version - This displays information about the current software installed in the DAB+ Radio.

Using the FM Radio

1If the DAB+ Radio is in DAB+ mode, press the MODE Button to select FM mode.

DON’T FORGET!

You may hear background noise as no station may have been tuned yet. The display will show the frequency of the FM station.

Automatic Tuning

1Press the SCAN Button to automatically search for the next available station.

2If the reception is poor, try Manual Tuning (see ‘Manual Tuning below’) to fine-tune the stations.

DON’T FORGET!

If the reception does not improve, try altering the position of the antenna. If the reception is still poor, scan again to determine whether a stronger signal exists for the desired frequency.

Manual Tuning

1Rotate the SELECT Button to manually tune through the frequency band.

2The frequency will increase or decrease in steps of 0.05 MHz for each turn of the SELECT Button.

Storing FM Presets

You can preset up to 10 FM stations. The procedure for storing and recalling FM presets is the same as described on page 10.