BR20DAB
Get going
1 Connect the mains power cord to the AC Input (at the rear of the unit), then connect the power cord to your desired wall outlet.
2 Turn the wall outlet power on, then press the power switch at the rear of the unit to the ON position.
3Using Headphones
To listen to this radio via the Headphones Jack, a pair of headphones (not supplied) with a 3.5mm diameter stereo plug and
When the headphones are connected, the speaker sound is automatically turned off.
4Using the DAB+ Radio with Batteries
The DAB+ Radio can be powered by 6 “C” types batteries. This allows the DAB+ Radio to be used outside or away from your wall power outlets.
To remove the Battery Compartment Cover, press the 2 retaining clips firmly and pull away from the DAB+ Radio.
Insert 6 “C” type batteries into the battery compartment, following the polarity diagram on the inside.
Then replace the Battery Compartment Cover. Make sure it clicks into place.
5Using AUX IN
To listen to your iPod or MP3 player, connect an audio cable (not supplied) to the AUX IN Socket located on the side of the DAB+ Radio. Then connect the other end of the cable to your auxiliary device, i.e. iPod or MP3 player. You will now be able to listen to your favourite songs on your iPod or MP3 Player.
7