BR20DAB
Daily Use DAB+
Switching On
1To turn on the DAB+ Radio, ensure the power switch on the rear of the unit is set to the ON position.
2Press the STANDBY button on the touch panel.
3To turn the DAB+ Radio off, press the STANDBY button again.
Adjusting the Volume
1To increase the volume, turn the volume control knob clockwise.
2To decrease the volume, turn the volume control knob
3You can also press the MUTE button to turn the sound off. To turn the sound back on, press the MUTE button again.
BBS (Bass boost System) function
The bass sounds can be enhanced by selecting the bass boost system.
1Press the BBS button to enhance the bass frequencies
2To turn off the bass boost system, press the BBS button again.
Listening to the DAB+ Radio
1Press the STANDBY button to turn the DAB+ Radio on.
2The following screen will be displayed. A bar graph indicates the progress of the initial search - the number of stations found increases as the scan progresses.
Number of stations found
Progress bar
3When the scan is complete, the DAB+ Radio will then select the first available station. Stations are listed in numerical then alphabetic order. The station list is retained in memory so the next time you switch the DAB+ Radio on, the station search does not take place. If there are no stations found, check that you have adequate DAB+ coverage in your area. You can find this out by visiting www.digitalradio.com.au and using their online post code checker.
Please note: You should also run a full scan to make sure all stations are stored.
8