BR20DAB
Troubleshooting / Technical Specification
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult you retailer or service center.
WARNING: Under no circumstances should you try to repair the set yourself, as this would invalidate the guarantee.
PROBLEM | CAUSE | SOLUTION |
No sound | • Volume not adjusted. | • Turn up the Volume. |
| • Headphones are connected. | • Disconnect the headphones. |
| • Main power cord is not | • Connect the mains power |
| connected correctly. | cord firmly into the AC/DC |
|
| socket of wall outlet. |
|
|
|
Button functions are not | • Electrostatic discharge. | • Turn off the unit, disconnect |
responding |
| the mains power cord, |
|
| reconnect after a few |
|
| seconds and turn the unit on |
|
| again. |
|
|
|
Poor radio reception | • Weak radio aerial signal. | • |
| This may be caused by | for best reception. |
| electrical interference from | • Extend the antenna rod to |
| electrical equipment like TVs, | full length. |
| video recorders, computer, | • Move the unit away from |
| etc. | other electrical equipment. |
|
|
|
Technical Specification
Power requirement | AC Input 230 V 50Hz |
| DC 9V, “C” |
Max Power Consumption | 13W |
Speaker Power Output | 1.2W |
10% THD Power Output | 1W |
DAB+ section | 174 MHz to 240 MHz |
FM section | 87.5 MHz to 108 MHz |
18