JVC CH-X100, GET0113-001A, KS-FX621, CH-X series, CDA-5755 manual Specifications, FM Tuner, AM Tuner

Page 28

SPECIFICATIONS

ENGLISH

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:

45 W per channel

Rear:

45 W per channel

Continuous Power Output (RMS):

Front:

17 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Rear:

17 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Bass:

±10 dB at 100 Hz

Treble:

±10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (250 nWb/m)

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60)

Frequency Response:

30 Hz to 16000 Hz (Normal tape) Signal-to-Noise Ratio: 56 dB

Stereo Separation: 40 dB

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C Dimensions (W ⋅ H ⋅ D):

Installation Size: 182 mm ⋅ 52 mm ⋅ 150 mm

Panel Size: 188 mm ⋅ 58 mm ⋅ 11 mm

Mass: 1.4 kg (excluding accessories)

TUNER SECTION

Frequency Range:

Design and specifications are subject to change

FM:

87.5 MHz to 108.0 MHz

without notice.

AM:

531 kHz to 1 602 kHz

 

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 ∝V/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 ∝V/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 ∝V

Selectivity: 35 dB

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents
«‘∑¬ÿ‡§√ËÕ߇≈Ëπ‡∑ª KS-FX621How to use the Mode button How to reset your unitStandby/on/attenuator SEL select Contents Location of the Buttons Control panelDisplay window Display windowTurning on the power To drop the volume in a momentTo turn off the power Basic OperationsRadio Operations Listening to the radioSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM When an FM stereo broadcast is hard to receiveStoring stations in memory Select the number 1 6 for the preset Station you want Manual presetTune in to a station in this example, of 88.3 MHz Tape Operations Listening to a cassetteTo fast-forward or rewind a tape To stop play and eject the cassetteFinding the beginning of a tune Playing the current tune repeatedly To cancel the prohibition and unlockProhibiting cassette ejection Sound Adjustments Adjusting the soundSelect the item you want to adjust You can adjust the sound characteristics to your PreferenceIndication For Preset values Turning on/off the loudness functionStoring your own sound adjustments To reset to the factory settingsSetting the clock Other Main FunctionsSet the hour Set the minuteSelecting the level display Finish the setting Select Level if not shown on the displaySelect the desired mode-AUDIO 1, Audio 2 or OFF Selecting the external Select the desired mode-LINE in orSelect EXT in if not shown on the display You can connect the external component to the CDDetaching the control panel Attaching the control panelPlaying discs CD Changer OperationsSelect the CD changer CD-CH To fast-forward or reverse the track/file To go to a particular disc directlyTo go to the next or previous tracks/files To skip to the next or previous folder only for MP3 discsCanceled IndicatorMode Plays at randomExternal Component Operations Select the external component LineUsing the Remote Controller Installing the batteryRemove the battery holder Place the battery Location of the buttons RM-RK31Troubleshooting Symptoms Causes RemediesCassette tape cannot be Insert the cassette withWhen connecting to the CD changer Reset button of the CD changerMaintenance To clean the headTo keep the tape clean Ignition key-off release/Ignition key-on playFM Tuner SpecificationsAM Tuner Slide the unit into the sleeve until it is locked Control panel Trim plateDashboard HandleTo keep the handles after installing it 12VCR2025 Be sure to ground this unit to the car’s chassisSeriously damaged Do not connect the speaker leads of the powerBelow, do not connect the unit Tape Disconnect the speakers from this unitConnect them to the amplifier. Leave Insulating tape, as illustrated above
Top Page Image Contents