JVC GET0471-001A manual Have intended them to play

Page 54

ENGLISH

MP3/WMA playback

CD changer

iPod/D. player playback

Symptoms	Remedies/Causes
• Tracks do not play back in the order you	Playback order is determined when the files are recorded.
have intended them to play.
• Elapsed playing time is not correct.	This sometimes occurs during play. This is caused by how the
	tracks are recorded on the disc.

• “NO FILES” appears on the display.	Insert a disc that contains MP3/WMA tracks.

• Correct characters are not displayed (e.g.	This unit can only display letters (upper case), numbers, and a
album name).	limited number of symbols.
• “NO DISC” appears on the display.	Insert a disc into the magazine.

• “NO MAG” appears on the display.	Insert the magazine.
• “RESET 8” appears on the display.	Connect this unit and the CD changer correctly and press the
	reset button of the CD changer.

• “RESET 1” – “RESET 7” appears on the	Press the reset button of the CD changer.
display.

• The CD changer does not work at all.	Reset the unit (see page 2).
• The iPod or D. player does not turn on or	• Check the connecting cable and its connection.
does not work.	• Update the firmware version.
	• Charge the battery.

• Buttons do not work as intended.	The functions of the buttons have been changed. Press MODE
	before performing the operation.

• The sound is distorted.	Deactivate the equalizer either on the unit or the iPod/
	D. player.

• “NO IPOD” or “NO DP” appears on the	• Check the connecting cable and its connection.
display.	• Charge the battery.
• Playback stops.	The headphones are disconnected during playback. Restart
	the playback operation using the control panel (see page 17).

• No sound can be heard when	• Disconnect the headphones from the iPod nano.
connecting an iPod nano.	• Update the firmware version of the iPod nano.

• No sound can be heard.	Disconnect the adapter from the D. player. Then, connect it
• “ERROR 01” appears on the display	again.
when connecting a D. player.

• “NO FILES” or “NO TRACK” appears on	No tracks are stored. Import tracks to the iPod or D. player.
the display.
• “RESET 1” – “RESET 7” appears on the	Disconnect the adapter from both the unit and iPod/D. player.
display.	Then, connect it again.

• “RESET 8” appears on the display.	Check the connection between the adapter and this unit.

• The iPod’s or D. player’s controls do not	Reset the iPod or D. player.
work after disconnecting from this unit.

24

Image 54

Contents Instructions How to reset your unit How to forcibly eject a discDriver must not watch the monitor while driving Contents Control panel Parts identificationDisplay window Main elements and features Installing the lithium coin battery CR2025Selects a track/file directly Operations 5UP / Down ∞buttons Changes the preset stationsVOL. + / buttons Number button 1 7 6 EQ equalizer buttonFor FM/AM tuner ⁄ Adjust the volume Basic settingsBasic operations ~ Turn on the power @ Adjust the sound as you want. SeeStoring stations in memory When an FM stereo broadcast is hard to receiveRadio operations Start searching for a stationDisc operations Manual presettingListening to a preset station Playing a disc in the unitAbout MP3 and WMA discs Playing discs in the CD changerSelect a disc About the CD changerOn-Screen OSD information Selecting the audio channelTo correct a mis-entry and to return to the previous menu To select a folder To select a track Selecting the playback modesMP3/WMA control screen operations Other main functions Prohibiting disc ejectionIndication For Sound adjustmentsAdjusting the sound Indication RangeGeneral settings PSM Indications Setting, referenceItems if necessary Scrolls the track information once Regardless of the settingItems to adjust ScrollTo pause*1 or stop*2 playback Adjust the volume ⁄ Adjust the sound as you want. SeeTo resume playback, press 4 after pressing Mode PreparationsSelect the desired menu For iPod Select your desired playback mode Repeat playSelecting a track from the menu For D. playerHow to clean the connectors MaintenanceHow to handle discs Moisture condensationTo keep discs clean More about this unitTo play new discs Playing a VCD disc GeneralPlaying a CD-R or CD-RW Playing an MP3/WMA discEjecting a disc General settings-PSMChanging the source MP3 files encoded with LayerTroubleshooting Symptoms Remedies/CausesDisc Display Charge the battery Playback stops Album name Limited number of symbolsReset button of the CD changer Connecting an iPod nanoSpecifications FM TunerAM Tuner Having Trouble with operation? Precautions on power supply and speaker connections Parts list for installation and connectionInstallation IN-DASH Mounting Removing the unitConnecting the parking brake wire / µËÕ ¬‡√¡Õ Connecting the crimp connector / «‘∏’µËÕ¢«µËÕÈ- À√Àπ’Typical connections / √‡ËÕ¡µËÕ·ªµ Connecting the monitor / √µËÕÕ¿æ KV-MR9010Instructions Buku Petunjuk Be careful not to drop the disc when it ejects Operations Maintenance Control panel Skips 10 items at a time if pressed and held Selects the audio channel for VCD playback Basic operations Radio operations Before performing any operations, make sure Playing discs in the CD changer On-Screen OSD information Selecting the playback modes For WMA disc Adjust the front and rear speaker balance. R06 to F06 General settings PSM Scroll *1 Once IPod/D. player operations Selecting the playback modes Clock Ôext in or Line Sticker residue General If you change the AMP Gain setting from Troubleshooting Have intended them to play Tone Control Range Ada Masalah dengan cara Pengoperasian? Indonesia Daftar bagian-bagian untuk pemasangan dan penyambunganPemasangan BINGKAI-DALAM Dash Memindahkan alat penerimaConnecting the crimp connector / Menyambung konektor kerut Typical connections / Ciri khas sambungan-sambunganConnecting the monitor / Menyambung monitor Penguat JVC