JVC GET0471-001A manual Tone Control Range

Page 55

Specifications

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front/Rear:

50 W per channel

Continuous Power Output (RMS):

Front/Rear:

19 W per channel into

 

4 Ω, 40 Hz to 20 000 Hz at

 

no more than 0.8% total

 

harmonic distortion.

Load Impedance:

4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

 

Bass:

±10 dB at 100 Hz

Treble:

±10 dB at 10 kHz

Frequency Response:

40 Hz to 20 000 Hz

Signal-to-Noise Ratio:

70 dB

Line-Out Level/

2.5 V/20 kΩ load (full

Impedance:

scale)

Output Impedance:

1 kΩ

Other Terminal:

LINE IN, CD changer

VIDEO SECTION

Color System:

PAL/NTSC

Video Output (Composite):

1 Vp-p/75 Ω

TUNER SECTION

Frequency Range:

FM:

87.5 MHz to 108.0 MHz

AM:

531 kHz to 1 602 kHz

FM Tuner

Usable Sensitivity:

11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 μV/75 Ω)

Alternate Channel

65 dB

Selectivity (400 kHz):

 

Frequency Response:

40 Hz to 15 000 Hz

Stereo Separation:

30 dB

AM Tuner

Sensitivity/Selectivity:

20 μV/35 dB

VCD/CD PLAYER SECTION

Type:

Compact disc player

Signal Detection

Non-contact optical pickup

System:

(semiconductor laser)

Number of Channels:

2 channels (stereo)

Frequency Response:

5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio:

98 dB

Wow and Flutter:

Less than measurable limit

MP3 Decoding Format: (MPEG1/2 Audio Layer 3)

Max. Bit Rate:

320 kbps

WMA (Windows Media® Audio) Decoding Format:

Max. Bit Rate:

192 kbps

GENERAL

Power Requirement:

Operating Voltage:

DC 14.4 V

 

(11 V to 16 V allowance)

Grounding System:

Negative ground

Allowable Operating

0°C to +40°C

Temperature:

 

Dimensions (W × H × D): (approx.)

Installation Size:

182 mm × 52 mm × 150 mm

Panel Size:

188 mm × 58 mm × 11 mm

Mass:

1.4 kg

 

(excluding accessories)

Design and specifications are subject to change without notice.

ENGLISH

25

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Instructions How to forcibly eject a disc How to reset your unitDriver must not watch the monitor while driving Contents Parts identification Control panelDisplay window Installing the lithium coin battery CR2025 Main elements and featuresNumber button 1 7 6 EQ equalizer button Operations 5UP / Down ∞buttons Changes the preset stationsVOL. + / buttons Selects a track/file directly@ Adjust the sound as you want. See Basic settingsBasic operations ~ Turn on the power For FM/AM tuner ⁄ Adjust the volumeStart searching for a station When an FM stereo broadcast is hard to receiveRadio operations Storing stations in memoryPlaying a disc in the unit Manual presettingListening to a preset station Disc operationsAbout the CD changer Playing discs in the CD changerSelect a disc About MP3 and WMA discsSelecting the audio channel On-Screen OSD informationTo correct a mis-entry and to return to the previous menu Selecting the playback modes To select a folder To select a trackMP3/WMA control screen operations Prohibiting disc ejection Other main functionsIndication Range Sound adjustmentsAdjusting the sound Indication ForIndications Setting, reference General settings PSMItems if necessary Scroll Regardless of the settingItems to adjust Scrolls the track information oncePreparations Adjust the volume ⁄ Adjust the sound as you want. SeeTo resume playback, press 4 after pressing Mode To pause*1 or stop*2 playbackFor D. player Select your desired playback mode Repeat playSelecting a track from the menu Select the desired menu For iPodMoisture condensation MaintenanceHow to handle discs How to clean the connectorsMore about this unit To keep discs cleanTo play new discs Playing an MP3/WMA disc GeneralPlaying a CD-R or CD-RW Playing a VCD discMP3 files encoded with Layer General settings-PSMChanging the source Ejecting a discSymptoms Remedies/Causes TroubleshootingDisc Connecting an iPod nano Album name Limited number of symbolsReset button of the CD changer Display Charge the battery Playback stopsFM Tuner SpecificationsAM Tuner Having Trouble with operation? Parts list for installation and connection Precautions on power supply and speaker connectionsRemoving the unit Installation IN-DASH MountingConnecting the crimp connector / «‘∏’µËÕ¢«µËÕÈ- À√Àπ’ Connecting the parking brake wire / µËÕ ¬‡√¡ÕTypical connections / √‡ËÕ¡µËÕ·ªµ KV-MR9010 Connecting the monitor / √µËÕÕ¿æInstructions Buku Petunjuk Be careful not to drop the disc when it ejects Operations Maintenance Control panel Skips 10 items at a time if pressed and held Selects the audio channel for VCD playback Basic operations Radio operations Before performing any operations, make sure Playing discs in the CD changer On-Screen OSD information Selecting the playback modes For WMA disc Adjust the front and rear speaker balance. R06 to F06 General settings PSM Scroll *1 Once IPod/D. player operations Selecting the playback modes Clock Ôext in or Line Sticker residue General If you change the AMP Gain setting from Troubleshooting Have intended them to play Tone Control Range Ada Masalah dengan cara Pengoperasian? Daftar bagian-bagian untuk pemasangan dan penyambungan IndonesiaMemindahkan alat penerima Pemasangan BINGKAI-DALAM DashTypical connections / Ciri khas sambungan-sambungan Connecting the crimp connector / Menyambung konektor kerutPenguat JVC Connecting the monitor / Menyambung monitor
Top Page Image Contents