JVC GET0287-003A manual General settings PSM, Basic procedure

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode) items listed on the table that follows.

1

2Select a PSM item.

3Adjust the PSM item selected.

4Repeat steps 2 and 3 to adjust the other PSM items if necessary.

5Finish the procedure.

ENGLISH

Ex.: When you select “AMP GAIN”

Indications	Selectable settings, [reference page]
DEMO	DEMO ON: [Initial]; Display demonstration will be activated
Display demonstration		automatically if no operation is done for about
		20 seconds, [7].
	DEMO OFF: Cancels.
CLOCK H	0 – 23 (1 – 12), [7]
Hour adjustment	[Initial: 0 (0:00)]
CLOCK M	00 – 59, [7]
Minute adjustment	[Initial: 00 (0:00)]
24H/12H	12H O 24H, [7]
24 hours or 12 hours time	[Initial: 24H]
display
CLK ADJ	AUTO: [Initial]; The built-in clock is automatically adjusted
Automatic clock setting		using the CT (clock time) data in the RDS signal.
	OFF:	Cancels.

To be continued....

17