JVC GET0287-003A manual Maintenance

Page 20

Maintenance

ENGLISH

How to clean the connectors

Frequent detachment will deteriorate the connectors.

To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

Connector

Moisture condensation

Moisture may condense on the lens inside the CD player in the following cases:

After starting the heater in the car.

If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the receiver turned on for a few hours until the moisture evaporates.

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.

Do not use any solvent (for

example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this receiver may reject the disc.

To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

How to handle discs

When removing a disc from Center holder

its case, press down the center holder of the case and lift the disc out, holding it by the edges.

Always hold the disc by the edges. Do not touch its recording surface.

When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up).

Make sure to store discs into the cases after use.

Do not use the following discs:

Warped

Sticker

Sticker

 

Stick-on

 

residue

Disc

label

disc

 

 

 

 

 

20

Image 20
Contents KD-S1501/KD-G152/KD-G151 How to forcibly eject a disc How to reset your unitContents How to read this manual How to use the Mode buttonControl panel KD-S1501/KD-G152/KD-G151 Parts identificationDisplay window To turn off the power Getting startedTo activate the display demonstration Canceling the display DemonstrationsSetting the clock To tune in to a station manually When an FM stereo broadcast is hard to receiveRadio operations SSM Strong-station Sequential Memory Listening to a preset stationManual presetting FM RDS operations PTY codesStoring your favorite programmes TA Standby ReceptionWhat you can do with RDS Tracking the same programme Network-Tracking Reception PTY Standby ReceptionDisc operations To fast-forward or reverse the trackTo stop play and eject the disc To go to a particular track directlyMode Plays repeatedly Mode Plays at randomSelecting the playback modes Prohibiting disc ejectionSound adjustments For Preset valuesAdjusting the sound To do RangeGeneral settings PSM Basic procedureIndications Selectable settings, reference AF-REGDetaching the control panel Detaching the control panelMaintenance More about this receiver Troubleshooting Symptoms Causes RemediesSpecifications Audio Amplifier SectionPrecautions on power supply and speaker connections Removing the receiver / Retrait de l’appareilElectrical Connections Typical connections / Raccordements typiquesRefer to page of How to reset your unit Having Trouble with operation?