JVC GET0195-001A manual Using the Remote Controller, Installing the battery

Page 34

USING THE REMOTE CONTROLLER

ENGLISH

This unit can be remotely controlled as instructed

here (with an optionally purchased remote

controller). We recommend that you use remote controller RM-RK50 or RM-RK60 with your unit. (Ex.: When you are using RM-RK60)

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between.

Remote sensor

•Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the remote controller decreases, replace the battery.

1. Remove the battery holder.

1)Push out the battery holder in the direction indicated by the arrow using a ball point pen or a similar tool.

2)Remove the battery holder.

(back side)

2. Place the battery.

Slide the battery into the holder with the

+side facing upwards so that the battery is fixed in the holder.

Lithium coin battery (product number: CR2025)

3. Return the battery holder.

Insert again the battery holder by pushing it until you hear a clicking sound.

(back side)

WARNING:

•Store the battery in a place where children cannot reach.

If a child accidentally swallows the battery, consult a doctor immediately.

•Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire.

Doing any of these things may cause the battery to give off heat, crack, or start a fire.

•Do not leave the battery with other metallic materials.

Doing this may cause the battery to give off heat, crack, or start a fire.

•When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may start to give off heat, crack, or start a fire.

•Do not poke the battery with tweezers or similar tools.

Doing this may cause the battery to give off heat, crack, or start a fire.

CAUTION:

DO NOT leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Otherwise, it may be damaged.

34

Image 34

Contents KD-G401 How to reset your unit How to use the Mode buttonContents Control panel Location of the ButtonsDisplay window To turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsProcedure below Finish the settingTo cancel the display demonstration, follow Same procedure and select Demo on in stepSetting the clock Searching for a station automatically Auto search Radio OperationsListening to the radio Select the band FM1 3, AMFM1 FM2 FM3 AM When an FM stereo broadcast is hard to receiveSearching for a station manually Manual search Each time you press Button, the band changes as FollowsStoring stations in memory FM station automatic preset SSMManual preset Select the FM band FM1 3 you want to store FM stations intoTuning in to a preset station Preset number flashes for a whileWhat you can do with RDS RDS OperationsTo use Network-Tracking Reception Press TP PTY to activate TA Standby Reception Using TA Standby ReceptionPress TP PTY again. The TP indicator Disappears To deactivate the TA Standby ReceptionUsing PTY Standby Reception To deactivate the PTY Standby ReceptionTo store your favorite programme types PTY code selected into the preset Number you wantSearching your favorite programme Press and hold the number buttonEx. When Rock M is selected Press ¢ or 4to start PTY search for your favorite programmeTo activate programme search, follow the procedure below Setting the TA volume levelAutomatic clock adjustment Turning the control dial clockwisePTY codes Same programme can be received on different frequenciesTo stop play and eject the CD CD OperationsPlaying a CD Insert a CD into the loading slotTo go to the next or previous tracks How to use the +10 and -10 buttonsTo fast-forward or reverse the track To go to a particular track directlyTo play back tracks at random Disc Random Play To play back tracks repeatedly Track Repeat PlayWhile pressing CD, press and hold 0 for more than 2 seconds To cancel the prohibition and unlock the discPlaying a CD Text Prohibiting disc ejection Disc title / performer Track titleCompatible with ID3 Tag What is MP3?MP3 Introduction Hierarchy LevelTo stop play and eject the disc MP3 OperationsPlaying an MP3 disc Insert an MP3 disc into the loading slotTo fast-forward or reverse the file To change the display informationTo skip to the next or previous files To go to a particular file quickly within Current folder +10 and -10 buttonsTo go to a particular folder directly To select a particular file in a folder, pressTo skip to the next or previous folder CanceledTo play back files at random Folder Random/Disc Random Play Sound Adjustments Indication For Preset valuesAdjust the setting Adjusting the soundSelect the item you want to adjust Repeat steps 1 and 2 to adjust the other itemsAdjust the PSM item selected Changing the general settings PSMBasic Procedure Ex. When you select DimmerSee Preferred Setting Mode PSM itemsIndications Selectable values/items 24H/12HTo select the scroll mode-SCROLL To select the dimmer mode-DIMMERTo select the telephone muting-TEL To turn the tag display on or offDetaching the control panel ConnectorsAttaching the control panel Using the Remote Controller Installing the batteryLocation of the buttons RM-RK60Symptoms Causes Remedies TroubleshootingStored in memory are erased About mistracking Maintenance Handling discsMW Tuner SpecificationsFM Tuner LW TunerHaving Trouble with operation? Und Erdung ausgelegt. Verfügt Ihr Hinweise HinweisRemarque Fuse blowsAlvorens de verbindingen tot stand te Avant de commencer la connexion VérifiezRear ground terminal Hintere Erdungscan Schlußklemme KD-G401 Rear speakersFront speakers Vordere Lautsprecher