BASIC OPERATIONS
1 |
|
| 2 |
3 |
|
Turning on the power | 4 Adjust the sound as you want (see |
1 Turn on the power. | page 14). |
|
ENGLISH
Note on
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
To drop the volume in a moment
Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
2 Select the source.
CD
F M
A M
To operate the tuner (FM or AM), see pages 8 – 10.
To operate the CD, see pages 11 – 13.
3 Adjust the volume.
To increase the volume.
To decrease the volume.
Volume level appears
Volume or audio level indicator (see page 18)
To turn off the power
Press and hold until "SEE YOU"
appears on the display.
Note:
When you use this unit for the first time, set the built- in clock correctly, see page 17
CAUTION on volume setting
CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.
7