ENGLISH
Storing your own sound | 3 Adjust the bass or treble level. |
adjustment | See page 14 for details. |
| |
You can adjust the sound modes (BEAT, SOFT, |
|
POP: see page 15) to your preference and store |
|
your own adjustments in memory. |
|
• There is a time limit in doing the following |
|
procedure. If the setting is cancelled before you |
|
finish, start from step 1 again. |
|
1 Call up the sound mode you want to adjust.
See page 15 for details.
SCM
2 Select “BAS” (bass) or “TRE” (treble).
To turn ON/OFF the loudness function.
See page 14 for details.
Each time you press LOUD, the loudness function turns on and off alternatively. (→ go to step 5)
LOUD
4 Repeat steps 2 and 3 to adjust the other items.
5 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
Your adjustment made for the selected sound
mode is stored in memory.
SCM
6 Repeat the same procedure to store other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset
values listed in the table on page 15.
16