JVC KD-LH1000 manual Sound Adjustments, Adjusting the sound, Adjust the level, Fad

SOUND ADJUSTMENTS

Adjusting the sound 2 Adjust the level.

ENGLISH

You can adjust the sound characteristics to your preference.

1 Select the item you want to adjust.

Each time you press the button, the adjustable items change as follows:

Fad				Bal		S.Bass
(Fader)			(Balance)			(Super Bass)
Vol Adj						Sub Out
(Volume Adjustment)					(Subwoofer Output)
Indication		To do:				Range
Fad*1	Adjust the front					R06 (Rear only)
	and rear speaker
	balance.					F06 (Front only)
Bal	Adjust the left					L06 (Left only)
	and right speaker
	balance.					R06 (Right only)
S. Bass*2	Adjust the bass.					00 (min.)
						08 (max.)
Sub Out*3	Adjust the					00 (min.)
	subwoofer output
	level and cutoff					12 (max.)
	frequency level.					Low/Mid/High
Vol Adj*4	Adjust and store					–12 (min.)
	the input level
	of each source.					+12(max.)

*1 If you are using a two-speaker system, set the fader level to “00.”

*2 The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume.

*3 This takes effect only when a subwoofer is connected.

*4 By adjusting the input level to match it to the FM sound level, you will not need to adjust the volume level each time you change the source. This adjustment is memorized for each source except FM.

To increase the level.

To decrease the level.

While adjusting fader and balance —Fad, Bal:

You can make these two adjustments at the same time, by referring to the indication on the display.

•Press 5 or ∞ to adjust the fader.

•Press ¢ or 4 to adjust the balance.

While adjusting subwoofer output

—Sub Out:

You can also set an appropriate cutoff frequency level according to the subwoofer connected:

•Press ¢ or 4 to select “Low,” “Mid,” or “High.”

Low: Frequencies higher than 50 Hz are cut off to the subwoofer.

Mid: Frequencies higher than 80 Hz are cut off to the subwoofer.

High: Frequencies higher than 115 Hz are cut off to the subwoofer.

18