BASIC OPERATIONS
D- | 1000 |
2 0 0 W
1 3 | 2 |
ENGLISH
Turning on the power
1 Turn on the power.
Note on
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2 Select the source.
To operate the tuner (FM or AM), see pages 9 – 13.
To play a CD,
see pages 14 – 17.
To operate the CD changer, see pages 30 – 33.
To operate the external component (Line In), see page 34.
3 Adjust the volume.
To increase the volume.
To decrease the volume.
Volume level appears
4 Adjust the sound as you want. (See pages 18 – 21.)
To drop the volume in a moment
Press 
briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial, you can also restore the sound.
CAUTION on Volume Setting:
Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.
To turn off the power
Press 
for more than one second.
•If you turn off the power while listening to a disc, CD play will start from where playback has been stopped previously, next time you turn on the power.
Note:
When you use this unit for the first time, set the built- in clock correctly, see page 22.
7