JVC KD-LH1000 manual Demonstration

Page 9

ENGLISH

Changing the display pattern

Canceling the display

 

demonstration

 

You can change the display pattern.

The number of the selectable display patterns

varies according to the playback sources.

When shipped from the factory, display

demonstration (MovieDemo) has been activated,

However, the unit basically provides three main

and starts automatically when no operations are

display patterns for each source, and once one of

these three patterns is selected, the same

done for about 20 seconds.

• It is recommended to cancel the demonstration

pattern is used for all the sources.

before you use the unit for the first time.

Press DISP (D).

To cancel the display demonstration, follow the

Each time you press the button,

procedure below:

the display patterns change as

1 Press and hold SEL

follows.

 

Ex.: When playing a CD

(select) for more than 2

seconds so that one of

Large animation

the PSM items appears

display

on the display.

 

 

(PSM: see page 23.)

Small animation

2 Press 5 (up) or ∞ (down)

repeatedly until “Disp

displays*

(display)” is selected

 

 

as the PSM category

 

(it is shown on the

Clock time

left side of the

display).

display

3 Select

“MovieDemo.”

* Small animation displays are used for showing

 

not only the source’s main information

 

(illustrated on this page as examples), but also

4 Select “Off.”

showing some other information. For details, see

each related section.

 

In this manual, the illustrations of the display are

5 Finish the setting.

mainly of the large animation display (initial

setting). If you have changed the display patterns

 

or some PSM items, the actual displays you see

 

will be different.

 

Note:

To activate the display demonstration, repeat

the same procedure and select “All Time” or

While playing a source, you can also show the level

“Interval” in step 4.

meter on the display. For details, see “Activating the

• For more details, see “To set movie demo—

level meter” on page 21.

MovieDemo” on page 23.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents For customer Use KD-LH1000Errata / Errata / Errata How to reset your unit PrecautionsInformation For U.S.A Contents Location of the Buttons Display window Mode M button Number buttonsControl panel Control dialRemote controller Installing the battery Preparing the remote controllerRemove the battery holder Place the batteryTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsDemonstration Radio Operations Listening to the radioSearching a station automatically Auto search When an FM stereo broadcast is hard to receive Searching a station manually Manual searchSelect the band FM1 3, AM FM1 FM2 FM3 AM FM station automatic preset SSM Manual presetFM1 FM2 FM3 AM Tuning in to a preset station Selecting a preset station directlySelect the number 1 6 for the preset station you want Selecting a preset station using the preset station list When receiving an AM or FM stationChanging the display information Playing a CD CD OperationsTo stop play and eject the disc Open the control panel Insert a disc into the loading slotTo fast-forward or reverse the track Selecting CD playback modesTo go to a particular track directly To go to the next or previous tracksProhibiting CD ejection To cancel the prohibition and unlock the discWhile pressing CD/CD-CH, press Hold for more than 2 seconds To play back tracks repeatedly Repeat PlayChanging the display information Adjusting the sound Sound AdjustmentsAdjust the level Select the item you want to adjustSelect the sound mode you want Storing your own sound adjustmentsPress EQ equalizer Select the sound mode you want to adjust Enter the sound mode adjustment modeIf you want to cancel the adjustments Sound adjustment itemsSelectable values Band Low Mid HighLevel Meter Activating the level meterPress EQ equalizer twice Select the level meter pattern you wantSelect the PSM item you want to adjust Basic ProcedureOther Main Functions Left side of the displayTo set movie demo-MovieDemo Preferred Setting Mode PSM itemsTo select the scroll mode-Scroll To adjust the display contrast levelTo select the dimmer mode-Dimmer LCD TypeChanging the display color Setting the desired color for each source-SourceAll Source*1 Changer *2 LineEnter the color selecting mode Select the display color Selecting or creating your own color UserAs you turn the control dial, the colors Change as follows Turn the control dial to adjust the selected primary color User ModeYou can adjust within the range of 0 to +11 Select User Select either Day or Night as your user colorTo erase the entered characters Select a characterSelect a source you want to assign a name to You can detach the control panel when leaving the car Detaching the control panelAttaching the control panel CD Changer Operations Playing CDsSelect the CD automatic changer CD-CH To change the information shown on the display Selecting a discTo go to the next track or the previous tracks To go to a particular disc directlyIndicator To select a disc using the disc listsPress 5 or ∞ to show the other disc name list, if necessary Select the number 1 6 for the disc you want to playRepeat 1 Repeat Repeat Off To play back only intros Intro ScanIntro 1 Intro Intro Off Plays repeatedlySelect the external component Line External Component OperationsSymptoms Causes Remedies TroubleshootingHandling CDs MaintenanceAvailable characters SpecificationsFM Tuner AM TunerCall
Top Page Image Contents