JVC KD-LH70R manual Setting the TA volume level, Automatic clock adjustment

Page 18

ENGLISH

Changing the display mode while listening to an FM station

You can change the initial indication on the display to station name (PS NAME) or station frequency (FREQ) while listening to an FM RDS station.

•See also “Changing the general settings (PSM)” on page 32.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 to select “TU DISP” (tuner display).

3Turn the control dial to set to the desired indication (“PS NAME” or “FREQ”).

4Press SEL (select) to finish the setting.

Note:

By pressing D (DISP), you can change the display while listening to an FM RDS station.

Each time you press the button, the following information appears on the display:

Station name

(PS NAME)

Station frequency

(FREQ)

Programme type

(PTY)

•Then, the display goes back to the original indication in several seconds.

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level.

•See also “Changing the general settings (PSM)” on page 32.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 to select “TA VOL” (volume).

3Turn the control dial to set to the desired volume.

You can set it from “VOL 00” to “VOL 50.”

4Press SEL (select) to finish the setting.

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

•See also “Changing the general settings (PSM)” on page 32.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 to select “AUTO ADJ” (adjustment).

3Turn the control dial counterclockwise to select “OFF.”

Now automatic clock adjustment is canceled.

4Press SEL (select) to finish the setting.

To reactivate clock adjustment, repeat the same procedure and select “ON” in step 3 by turning the

control dial clockwise.

Note:

You must stay tuned to the same station for more than 2 minutes after setting “AUTO ADJ” to “ON.” Otherwise, the clock time will not be adjusted. (This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal.)

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents KD-LH70R How to reset your unit How to use the M Mode buttonPosition And Reproduction Of Labels Contents Control panel Mode buttonLocation of the Buttons Display windowRemote controller Remove the battery holder Installing the batteryReturn the battery holder Place the batteryTo turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSet the clock system Setting the clockFinish the setting Set the minuteSearching a station automatically Auto search Radio OperationsListening to the radio Select the band FM1 3, AMWhen an FM stereo broadcast is hard to receive Searching a station manually Manual searchTune in to a station you want while Manu manual is flashing FM station automatic preset SSM Manual presetStoring stations in memory Press and hold the number button Tuning in to a preset stationSelect the number 1 6 for the preset station you want This example, 1 for more thanRDS Operations What you can do with RDSTo use Network-Tracking Reception Press T TP/PTY to activate TA Standby Reception Using TA Standby ReceptionPress T TP/PTY again. The TP indicator Disappears To deactivate the TA Standby ReceptionUsing PTY Standby Reception Select OFF in on the left column. PTY indicator disappearsTo deactivate the PTY Standby Reception Below Selected preset number and Memo Memory appear alternatelyTo store your favorite programme types, see To search your favorite programme type, seeEx. When Rock M is selected To activate programme search, follow the procedure belowControl dial counterclockwise Setting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station PTY codes Same programme can be received on different frequenciesOpen the control panel CD OperationsPlaying a CD Insert a CD into the loading slotTo go to the next or previous tracks To stop play and eject the CDTo fast-forward or reverse the track To go to a particular track directlyHow to use the +10 and -10 buttons To play back tracks at random Disc Random PlayTo play back tracks repeatedly Track Repeat Play Playing a CD Text Prohibiting disc ejection While pressing CD/CD-CH, press Hold for more than 2 secondsDisc title / performer Track title MP3 Introduction What is MP3?Precautions when recording MP3 files on a CD-R or CD-RW Compatible with ID3v1 VersionHierarchy MP3 folder/file configurationMP3 playback/search order Level6MP3 Operations Playing an MP3 discInsert an MP3 disc into the loading slot To change the display information Portion on an MP3 discTo stop play and eject the disc To fast-forward or reverse the fileTo select a particular file in a folder, press To go to a particular folder directlyTo skip to the next or previous folder ¢ or 4 after selecting the folderFldr RND Disc RND CanceledTo play back files at random Folder Random/Disc Random Play TRK RPT Fldr RPTPress M Mode to enter the functions mode Sound AdjustmentsSelecting preset sound modes C-EQ custom equalizer Select the sound mode you wantAdjusting the sound BALVOL Basic Procedure Ex. When you select LevelOther Main Functions 24H/12H Preferred Setting Mode PSM itemsIndications Selectable values/items DAB AFTo select the dimmer mode-DIMMER To set the clock display-CLOCKTo select the level meter-LEVEL To select the telephone muting-TELTo select the scroll mode-SCROLL To select the external component to useTo turn the tag display on or off-TAG Disp To erase the entered characters Select a source you want to assign a name to CD CD-CHSelect a character Connectors Detaching the control panelAttaching the control panel Playing discs Selected disc number Folder indicator MP3 indicatorCD Changer Operations Select the CD changer CD-CH CD CD-CHTo go to the next or previous tracks/files To go to a particular disc directlyTo fast-forward or reverse the track/file Selected disc number Elapsed playing time Current trackTo go to a track/file quickly +10 and -10 buttons To skip to the next or previous folder only for MP3 discsTo show the disc information for CD Text and MP3 discs To skip 10 tracks/files* backwards to the first track/fileFor MP3 discs Canceled MAG RNDDisc RND MAG RND For CDsCanceled Disc RPT TRK RPT Disc RPTSelect the external component Line Ex. When you select Line in as the sourceExternal Component Operations CD LineSelect the DAB tuner What is DAB system?DAB Tuner Operations DAB FM/AMService name Ensemble name Channel number Frequency Tuning in to an ensembleTo restore the FM/AM tuner Start searching for an ensemblePress 5 up to select the next service Storing DAB services in memorySelect a service of the ensemble you want to listen to Select the DAB band DAB1, DAB2, or DAB3 you wantWhat you can do more with Tuning in to a preset DAB serviceWhile receiving a DAB service WantTo adjust the DAB volume level To use Alternative ReceptionStored in memory are erased TroubleshootingSymptoms Causes Remedies DiscMP3 Playback About mistracking Maintenance Handling discsMW Tuner SpecificationsFM Tuner LW TunerHaving Trouble with operation? Avant le montage Appuyer sur Before mounting PressVor dem Einbau Drücken Sie Voordat u aan de montage van het apparaatCR2025 HinweisRemarque Be sure to ground this unit to the car’s chassisZal het apparaat ernstige schade oplopen NE Connectez PAS les fils d’enceintes duSonst das Gerät schwer beschädigt wird Si le câblage des enceintes de votre voitureOder
Top Page Image Contents