JVC KD-LH70R manual To stop play and eject the CD, To fast-forward or reverse the track

To stop play and eject the CD

Press 0.

CD play stops and the control panel flips down. The CD automatically ejects from the loading slot. The source changes to the previously selected source.

•If you change the source, CD play also stops (without ejecting the CD).

Next time you select “CD” as the source, CD play starts from where playback has been stopped previously.

Notes:

•If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc play will not start this time.)

•You can eject the disc even when the unit is turned off.

Locating a track or a particular portion on a CD

To fast-forward or reverse the track

Press and hold ¢ , while playing a CD, to fast-forward the track.

Press and hold 4, while playing a CD, to reverse the track.

To go to the next or previous tracks

Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track.

Each time you press the button consecutively, the beginning of the next tracks is located and played back.

Press 4 briefly, while playing a CD, to go back to the beginning of the current track. Each time you press the button consecutively, the beginning of the previous tracks is located and played back.

To go to a particular track directly

Press the number button corresponding to the track number to start its playback.

•To select a track number from 1 – 6: Press 1 (7) – 6 (12) briefly.

•To select a track number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than one second.

To go to a track quickly (+10 and –10 buttons)

1Press M (MODE) to enter the functions mode while playing a CD.

“MODE” flashes on the upper part of the display.

2Press +10 or –10.

To skip 10 tracks* forwards to the last track

To skip 10 tracks* backwards to the first track

*The first time you press +10 or –10 button, the track skips to the nearest higher or lower track with a track number of multiple

ten (ex. 10th, 20th, 30th).

Then, each time you press the button, you can skip 10 tracks (see “How to use the +10 and –10 buttons” on page 22).

•After the last track, the first track will be selected, and vice versa.

CONTINUED ON THE NEXT PAGE

ENGLISH

21