JVC KD-LX30 manual To adjust the volume increase rate, If Audio Cruise does not function correctly

Page 23

When this function is turned on (the CRUISE indicator lights up on the display), the proper volume level is automatically selected among the 3 possible levels according to the driving speed, and the selected level is shown on the display.

When the driving speed increases.

When the driving speed decreases.

To adjust the volume increase rate

If you find Audio Cruise increases (or decreases) the volume either too much or too little as the driving speed changes, you can adjust the increase rate by changing the boost level. To change it, follow the procedure below.

1Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press ¢ or 4 repeatedly until “CRUISE MODE” appears on the display.

3Press + or – to select either “CRUISE 1” or “CRUISE 2.”

4Press ¢ (or 4 ) to select “BOOST.”

The current boost level also appears on the display.

5Press + or – to select the desired boost level (among 01 to 15).

6Press SEL again to finish the setting.

If Audio Cruise does not function correctly

You may need to store the idling speed into memory to make Audio Cruise function correctly.

NOTICE that a number of factors, such as electric power steering, wipers, power windows, air conditioner, etc. do generate noises and, as a result, may cause Audio Cruise not to function correctly. If this is the main cause of malfunction, connect the memory backup lead (yellow lead) directly to the car battery to prevent these noises from affecting Audio Cruise.

1Start the engine and let it warm up.

2Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears on the display.

3Press ¢ or 4 repeatedly until “CRUISE MODE” appears on the display.

4Press + or – to select either “CRUISE 1” or “CRUISE 2.”

5Press ¢ (or 4 ) to select “+OR– RPM SET.”

6Press + or – to select the desired idling speed.

7Press SEL again to finish the setting.

When the setting is complete, the unit automatically checks to see if Audio Cruise functions correctly with this new idling setting. If it does not function correctly, Audio Cruise is canceled automatically and the idling setting becomes invalid.

• If this happens, see the NOTICE above.

ENGLISH

23

Image 23
Contents KD-LX30 InstructionsInformation For U.S.A PrecautionsContents External Component Operations To activate the display demonstrationBasic Operations Turn on the powerAdjust the volume Adjust the sound as you want see pages 16Searching a station automatically Auto search Mode 1- 1 1Radio Operations Listening to the radioTune into a station you want while M is flashing When an FM stereo broadcast is hard to receiveSearching a station manually Manual search 1 1 FM station automatic preset SSMStoring stations in memory Tune into a station of 88.3 MHz Manual preset1- 2 Tuning into a preset stationSelect the number 1 6 for the preset station you want Insert a disc into the loading slot CD OperationsPlaying a CD Open the loading slotPlaying a CD Text Select text display mode while playing a CD TextTo go to a particular track directly Locating a track or a particular portion on a CDTo fast-forward or reverse the track To go to the next tracks or the previous tracksTo play back tracks repeatedly Repeat Play Selecting CD playback modesTo play back tracks at random Random Play To play back only intros Intro Scan Prohibiting CD ejectionAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustTurning on/off the Bbeii function To cancel the Bbeii function, select BBE OFFIndication For Preset values Using the Sound Control MemoryLight Mode on the lower part of the display Select the sound mode you wantRecalling the sound modes To reset to the factory settings Storing your own sound adjustmentsTo adjust the bass or treble level Repeat the same procedure to adjust other sound modesOther Main Functions Setting the clockYou can select the proper cruise mode for your car Controlling the volume automatically Audio CruiseIf Audio Cruise does not function correctly To adjust the volume increase rateBasic Procedure Changing the general settings PSMPress SEL to finish the setting To select the level meter To cancel Advanced SCMTo select the dimmer mode To set the clock displayTo change the AM/FM channel intervals To adjust the display contrast levelTo select the scroll mode To select the subwoofer cutoff frequencyTo make the front panel look flat hiding the control panel To adjust the line input levelSources Maximum number of the characters Assigning names to the sourcesTo erase the input characters Select the character set you want while is flashingSelect a character Small letters Numbers and symbolsAvailable characters Capital lettersReturn the battery holder Installing the batteryRemove the battery holder Place the batteryUsing the remote controller Select the CD automatic changer CD Changer OperationsPlaying CDs To show the CD Text information To go to a particular disc directlyMode RPT Indicator Plays repeatedly Mode RND Indicator Plays at randomIntro Mode Indication Plays the beginnings 15 secondsOperate the external component Using a subwooferPlaying an external component Select the external componentHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingAM Tuner SpecificationsFM Tuner Call