Searching a station manually: Manual search
MONO | MODE 1- 1 1- 2 | 2 |
1 | 1 | 2 |
Select the band.
1Press SOURCE (ATT) to select the tuner as the source.
2 Press BAND to select the band (FM1, FM2, FM3 or AM).
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2
Press and hold 
¢ or 4
until “M” (Manual) starts flashing on the display.
ENGLISH
3
To tune into stations of higher frequencies
To tune into stations of lower frequencies
Tune into a station you want while “M” is flashing.
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
When an FM stereo broadcast is hard to receive:
1 Press MODE while listening to an FM stereo broadcast (the ST indicator lights up while receiving an FM stereo broadcast).
“MODE” appears on the lower part of the display, and the number buttons can work as different function buttons.
2 Press MONO (monaural), while “MODE” is still on the display, so that the MO indicator lights up on the display.
The sound you hear becomes monaural but reception will be improved (the ST indicator goes off).
Each time you press the button, the MO indicator lights up and goes off alternately.
7