To adjust the display contrast level
You can adjust the display contrast level among 01 (dark) to 10 (bright). When shipped from the factory, the display contrast level is set at level 05.
To select the scroll mode
You can select the scroll mode for the disc information if it consists of more than 12 characters. When shipped from the factory, Auto Scroll mode is set to “SCROLL ONCE.”
•SCROLL ONCE: Scrolls only once.
•SCROLL AUTO: Repeats the scroll (in
•SCROLL OFF: Cancels Auto Scroll.
Note:
Even if the scroll mode is set to “SCROLL OFF,” you can scroll the display by pressing DISP for more than 1 second.
To select the subwoofer cutoff frequency
When a subwoofer is connected to this unit, select an appropriate cutoff frequency level for your subwoofer. When shipped from the factory, the subwoofer cutoff frequency is set to
“MID.” |
| |
• | FREQ LOW: | Frequencies higher than 50 Hz are cut off to the subwoofer. |
• | FREQ MID: | Frequencies higher than 80 Hz are cut off to the subwoofer. |
• | FREQ HIGH: | Frequencies higher than 120 Hz are cut off to the subwoofer. |
To change the AM/FM channel intervals
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and 200 kHz for FM (AREA US settings).
You will have to change the channel intervals when using this unit in an area other than North America and South America.
•AREA EU: Select this when using this unit in an area other than North and South America. (9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM)
•AREA US: Select this when using this unit in North or South America. (10 kHz for AM and 200 kHz for FM)
Note:
If the channel intervals settings are changed, the names assigned to the stations will be erased from memory. To reassign the names, see “Assigning names to the sources” on pages 29 – 31.
ENGLISH
27