ENGLISH
3
Select the character set you want while “ 
” is flashing.
Each time you press the button, the character set changes as follows:
Capital letter ( 
)
Small letter ( 
)
Numbers and symbols ( 
) 
4
Select a character.
About the available characters, see page 31.
5
Move the cursor to the next (or previous) character position.
6
Repeat steps 3 to 5 until you finish inputting the name.
7
Press the button while the last selected character is flashing.
The input name is stored in memory.
To erase the input characters
Insert spaces using the same procedure described above.
30