JVC Complete Guide to Resetting and Troubleshooting Your Car Stereo - How to Reset Car Stereo and Bluetooth Pairing

Page 16

Troubleshooting

 

Symptom

Remedy/Cause

 

 

 

 

Sound cannot be heard from the

Adjust the volume to the optimum level. / Make sure the unit is not

 

speakers.

muted/paused. (page 6) / Check the cords and connections.

 

“MISWIRING CHK WIRING THEN RESET

Check to be sure the terminals of the speaker leads are covered with

 

UNIT” appears on the display and no

insulating tape properly, then reset the unit. (page 3)

 

operations can be done.

If the message does not disappear, consult your JVC car audio dealer

General

 

or a company supplying kits.

The unit does not work at all.

Reset the unit. (page 3)

 

 

“F-AUX” or “R-AUX” cannot be selected.

Check the <SRC SELECT> = <F-AUX / R-AUX> setting. (page 15)

 

Sound is sometimes interrupted while

Check to be sure the recommended stereo mini plug is used for

 

listening to an external component

connection. (page 9)

 

connected to the auxiliary input jack.

 

 

The correct characters are not displayed

This unit can only display letters (upper case), numbers, and a

 

(e.g. album name).

limited number of symbols.

FM/AM

SSM automatic presetting does not

Store stations manually.

work.

 

 

 

 

Static noise while listening to the radio.

Connect the antenna firmly.

 

“AM” cannot be selected.

Check the <SRC SELECT> = <AM> setting. (page 15)

 

Disc cannot be played back.

Insert the disc correctly.

 

CD-R/CD-RW cannot be played back

Insert a finalized CD-R/CD-RW (finalize with the component which

playback

and track cannot be skipped.

you used for recording).

Disc sound is sometimes interrupted.

Stop playback while driving on rough roads. / Change the disc. /

 

 

 

Check the cords and connections.

Disc

“NO DISC” appears on the display.

Insert a playable disc into the loading slot.

“PLEASE” and “EJECT“ appear

Press 0, then insert a disc correctly.

 

alternately on the display.

 

 

“IN DISC” appears on the display.

The disc cannot be ejected properly. Make sure nothing is blocking

 

 

the loading slot.

 

Disc cannot be played back.

Use a disc with MP3/WMA tracks recorded in a format compliant

playback

 

with ISO 9660 Level 1, Level 2, Romeo, or Joliet. / Add the extension

 

code <.mp3> or <.wma> to the file names.

 

 

 

Noise is generated.

Skip to another track or change the disc.

MP3/WMA

“READING” keeps flashing on the

A longer readout time is required. Do not use too many hierarchical

have intended them to play.

levels and folders.

 

display.

 

Tracks do not play back in the order you

The playback order is determined when the files are recorded.

 

 

 

 

The elapsed playing time is not correct.

This sometimes occurs during playback. This is caused by how the

 

 

tracks are recorded on the disc.

USB playback

“READING” keeps flashing on the

A longer readout time is required. Do not use too many hierarchical

display.

USB device again.

 

levels and folders. / Turn off the power then on again. / Reattach the

 

 

 

16

ENGLISH

Image 16
Contents KD-R526/KD-R426 To obtain the best possible performance from the unit Thank you for purchasing a JVC productEuropean Union only Stop the car before operating the unit Contents Canceling the display demonstration Setting the clockInitial setting Initial settingPreparing the remote controller About discsDiscs that cannot be used Handling discsBasic operations Improving the FM reception Manual presetting FM/AM Automatic presetting FMSelecting a preset station Listening to the radioListening to a disc Stopping playback and ejecting the discBasic operations Selecting a track/folder from the listConnecting the other external components Setting NameListening to the other external components PreparationListening to a USB device ~ ŸSelecting the control terminal Listening to an iPod/iPhoneSelecting a track from the menu Ipod Mode / EXT Mode are not available Selecting a preset sound modeAlbum RND is not available for some iPod/ iPhone Storing your own sound mode Menu operationsLevel. / OFF Cancels Intervals. / OFF CancelsFader *7, *8 00 08 04 Adjusts the subwoofer output level KS-BTA100. / OFF CancelsDisplayed only when the source is FM. For settings, see On / OFF Activates or deactivates the keypress toneTroubleshooting For KD-R526 Noise is generated Skip to another fileOrder you have intended Unit. / Reattach the USB device againUsing Bluetooth devices Adjusting the microphone volumeAbout microphone volume Receiving a callSpecifications Having Trouble with operation? Precautions on power supply and speaker connections This unit does not work at all. Have you reset your unit?In-dash mounting / 裝設、固定在儀表板內 Removing the unit / 拆卸本機KD-R526 Vehicle-specific Wiring Harness Separately purchasedKD-R426