JVC KD-R526, KD-R426 manual Basic operations

Basic operations

Loading slot Control dial Display window Ejects the disc

Remote sensor

• DO NOT expose to bright sunlight.

Detaches the panel

Front auxiliary input jack

USB (Universal Serial Bus) input terminal

6

When you press or hold the following button(s)...

	Main unit	Remote	General operation
		controller
		—	• Turns on.
			• Turns off [Hold].
	/ SOURCE		Selects the sources (FM, CD, USB or USB-IPOD, F-AUX, BT AUDIO or
		SOURCE	R-AUX or BT PHONE, AM).
			• “CD” or “USB” is selectable only when a disc is loaded or a USB
			device is connected.
Control dial		VOL – / +	Adjusts the volume level.
	(turn)	—	Selects items.
			Mutes the sound during playback. If the source is “CD” or “USB/
Control dial			USB-IPOD” playback pauses.
	(press)		• Press the button again to cancel muting or resume playback.
		—	Confirms selection.
			Selects the sound mode.
	EQ	SOUND	• Hold the EQ button on the main unit to enter tone level
			adjustment directly. (page 12)
BRIGHTNESS		—	Enters <BRIGHTNESS> menu directly. (page 14)
			• KD-R526: Selects the controlling terminal of an iPod/iPhone
	BACK	—	[Hold]. (page 11)
			• Returns to the previous menu.
			• Exit from the menu [Hold].
	DISP	—	• Changes the display information.
			• Scrolls the display information [Hold].
ENGLISH