JVC KD-S690 Preparing the remote controller, Installing the battery, Remove the battery holder

Page 6

ENGLISH

Preparing the remote controller

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between.

Remote sensor

•Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the remote controller decreases, replace the battery.

1. Remove the battery holder.

1)Push out the battery holder in the direction indicated by the arrow using a ball point pen or a similar tool.

2)Remove the battery holder.

(back side)

2. Place the battery.

Slide the battery into the holder with the

+side facing upwards so that the battery is fixed in the holder.

Lithium coin battery (product number: CR2025)

3. Return the battery holder.

Insert again the battery holder by pushing it until you hear a clicking sound.

(back side)

WARNING:

•Store the battery in a place which children cannot reach.

If a child accidentally swallows the battery, immediately consult a doctor.

•Do not recharge, short, disassemble or heat the battery or dispose of in a fire.

Doing any of these things may cause the battery to give off heat, crack or start a fire.

•Do not leave the battery with other metallic materials.

Doing this may cause the battery to give off heat, crack or start a fire.

•When throwing away or saving the battery, wrap in tape and insulate; otherwise, it may cause the battery to give off heat, crack or start a fire.

•Do not poke the battery with tweezers or similar tools.

Doing this may cause the battery to give off heat, crack or start a fire.

CAUTION:

DO NOT leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Otherwise, it may be damaged.

6

Image 6

Contents KD-S7350 KD-S690For customer Use How to reset your unit Information For U.S.AContents Location of the Buttons Control panelDisplay window Remote controller Remove the battery holder Preparing the remote controllerInstalling the battery Place the batteryTo turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSetting the clock Clock H Clock MSearching a station automatically Auto search Radio OperationsListening to the radio Searching a station manually Manual searchStoring stations in memory FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Tune in to a station you want while M manual is flashingRepeat the above procedure to store Tuning in to a preset stationManual preset Other stations into other preset NumbersTo stop play and eject the CD CD OperationsPlaying a CD Insert a CD into the loading slotTo go to a particular track directly To fast-forward or reverse the trackTo go to the next or previous tracks To go to a track quickly +10To play back tracks at random Disc Random Play To cancel the prohibition and unlock the CDProhibiting CD ejection While pressing CD, press and hold 0 for more than 2 secondsSelect the sound mode you want Sound AdjustmentsSelecting preset sound modes C-EQ custom equalizer For Preset valuesAdjusting the sound BASVOL Selecting the level display Level Select the desired modeOther Main Functions Select Level if not shown on the displayDetaching the control panel Attaching the control panelTroubleshooting Symptoms Causes RemediesMaintenance Handling discsSpecifications FM TunerAM Tuner Refer to page of How to Reset CallKD-S890/KD-S7350/KD-S690 Con esta unidad se suministran las siguientes piezas NotaRemarque Después de inspeccionarlas, colóquelas correctamenteElectrical Connections Be sure to ground this unit to the car’s chassisNo sound from the speakers KD-S890 KD-S7350 KD-S690Fuse blows Sound is distortedAfter installing the unit