ENGLISH
Selecting the level display
You can select the level display according to your preference. When shipped from the factory, “VOL 2” is selected.
VOL 1: Shows the volume level indicator and the equalization pattern indicator.
VOL 2: Alternates “VOL 1” setting and illumination display.
OFF: Erase the volume level indicator and the equalization pattern indicator.
3 1,4 | 2 |
Equalization pattern indicator
Volume level indicator
1
Press and hold SEL for more than 2 seconds to call up the general setting mode (see page 29).
2
Select “LEVEL” if not shown on the display.
3
Select the desired mode — “VOL 1”, “VOL 2” or “OFF”.
4
Finish the setting.
28