JVC KD-SH707 manual To go to a particular directory directly, On the control panel

To go to a particular directory directly

IMPORTANT:

To directly select the directories using the number button(s), it is required that directories are assigned 2 digit numbers at the beginning of their directory names. (This can only be done during the recording of CD-Rs or CD-RWs.) Ex.: If directory name is “01 ABC”

press 1 to go to Directory “01 ABC.” If directory name is “1 ABC,” pressing 1 does not work.

If directory name is “12 ABC” press and hold 6 (12) to go to Directory “12 ABC.”

Press the number button corresponding to the directory number to start playing the first file in the selected directory.

•To select a directory number from 01 – 06: Press 1 (7) – 6 (12) briefly.

•To select a directory number from 07 – 12: Press and hold 1 (7) – 6 (12) for more than 1 second.

Notes:

•If “MP3” flashes on the display after you have selected a directory, it means that the directory does not contain any MP3 files.

•You cannot directly select a directory with a number greater than 12.

To select a particular file in a directory, press

¢ or 4 after selecting the directory.

To skip to the next directory—either on the same hierarchy level or on a different hierarchy level

On the control panel:

1Press MODE (M) while playing

an MP3 disc. The unit enters the functions mode.

2Press ¢ briefly while still in the functions mode.

Each time you press the button consecutively, the next directory is located (and the first file in the directory starts playing, if recorded).

(See “MP3 playback/search order” on page 19.)

On the remote controller:

Each time you press and hold the

PRESET

button consecutively, the next

directory is located (and the first file in the directory starts playing, if recorded).

(See “MP3 playback/search order” on page 19.)

ENGLISH

23