JVC KD-SH99 manual Storing your own sound adjustments, Indication Preset values

Page 23
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 35.
Press EQ to store the adjustments.
6
• Refer to the table below for adjusting the selected sound element.
4 Repeat steps 2 and 3 to adjust the other sound elements.
5 Select one of the user sound modes (USER 1, USER 2, USER 3).
Ex.: When you select “USER 2”
Adjust the selected sound element.
3

Storing your own sound adjustments

You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2 and USER 3).

There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

ENGLISH

1 Press EQ.

The last selected sound mode is recalled, and is applied to the current source.

Ex.: When you have selected “POP” previously

2 Press SEL (select) to select sound elements to adjust.

Each time you press the button, the sound elements

change as follows:

LOW FREQ.* =LOW WIDTH =LOW LEVEL = MID FREQ.* =MID WIDTH =MID LEVEL = HIGH FREQ.* =HIGH LEVEL =

(back to the beginning)

FREQ. (LOW, MID, HIGH):

Select the center frequency to adjust. WIDTH (LOW, MID):

Select the band width level (Q).

LEVEL (LOW, MID, HIGH):

Adjust the enhancement level.

*By pressing ¢ or 4, you can directly move as follows:

LOW FREQ. MID FREQ.

HIGH FREQ.

Indication

Preset values

LOW

MID

 

HIGH

 

 

 

 

 

 

 

 

 

50 Hz

700 Hz

8 kHz

FREQ.

80 Hz

1 kHz

12 kHz

 

120 Hz

2 kHz

 

 

 

 

 

 

 

 

 

WIDTH

1 (min.)

1 (min.)

 

 

 

 

 

 

 

 

 

 

4 (max.)

2 (max.)

 

 

 

 

 

 

 

 

 

LEVEL

–06 (min.)

–06 (min.)

–06 (min.)

 

 

+06 (max.)

+06 (max.)

+06 (max.)

 

 

 

 

 

 

23

Image 23
Contents For customer Use KD-SH99Information For U.S.A How to reset your unitPrecautions Contents Control panel How to use Mode MLocation of the Buttons Remote controller Return the battery holder Installing the batteryRemove the battery holder Place the batteryBasic Operations To drop the volume in a momentTo turn off the power Searching a station manually Manual search Radio Basic OperationsListening to the radio Searching a station automatically Auto searchStoring stations in memory FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Tune into a station of 88.3 MHz Tuning into a preset stationManual preset Open the loading slot CD OperationsPlaying a CD To stop play and eject the discTo play back tracks at random Random Play Portion on a CDTo fast-forward or reverse the track To go to a particular track directlyTo play back only intros Intro scan Select text display mode while playing a CD TextProhibiting disc ejection Playing a CD TextMP3 Introduction What is MP3?Precautions when recording MP3 files on a CD-R or CD-RW Other Main Features in this unitHierarchy MP3 directory/file configurationMP3 playback/search order Movement between the directoriesInsert an MP3 disc into the loading slot When TAG on is selected initial setting seeMP3 Operations Playing an MP3 discSlot To change the display informationTo fast-forward or reverse the file To skip to the next file or the previous filesOn the control panel On the remote controllerTo go to a particular directory directly To select a particular file in a directory, pressTo skip to the directories on the upper hierarchy levels To skip to the next directory on the same hierarchy levelTo skip to the directories on the lower hierarchy levels To play back files at random Random Play RPT 1 RPT CanceledTo play back files repeatedly Repeat Play Adjusting the sound Sound AdjustmentsPress EQ Select the sound mode you wantIndication Preset values Storing your own sound adjustmentsPress SEL select to select sound elements to adjust Other Main Functions Setting the clockChanging the general settings PSM Basic ProcedurePreferred Setting Mode PSM items To set the clock display Clock Disp To select the dimmer mode DimmerTo adjust the display contrast level To select the scroll mode ScrollTo turn the tag display on or off TAG Disp To adjust the line input level Line ADJTo adjust the auxiliary input level To change the FM tuner selectivitySelect a character Capital letters Small letters Numbers and symbolsTo erase the input characters Select a source you want to assign a name toChanging the control panel angle When using the remote controllerAdjust the angle to the position you want To restore the control panel to its original positionUnlock the control panel Detaching the control panelAttaching the control panel MP3 player, MD player, etc When you select a source, the power automatically comes onExternal Component Operations Select the external component AUX Input or Line InputAdjust the sound you want. See When connecting a DVD playerWhen connecting a VCR To go to the next track or the previous tracks CD Changer OperationsPlaying CDs Select the CD automatic changer CD ChangerTo play back tracks at random Random Play Mode Indicator Plays the beginnings SecondsTo go to a particular disc directly To play back tracks repeatedly Repeat PlayAvailable characters Sound modes preset value settingsAdditional Information Reset button of the CD changer TroubleshootingSymptoms Causes Remedies MP3 Moisture condensation MaintenanceHow to handle discs Handling discsAM Tuner SpecificationsPower Requirement FM TunerCall Avant le montage Appuyer sur Power cannot be turned onBefore mounting Press Antes de instalar PulseNota Be sure to keep the handles after installing itAsegúrese de conservar las manijas después de instalarlo Be sure to ground this unit to the car’s chassisAmarillo*1 Bypassing the ignition switch See diagram JVC CD changer jack Salida de lineaVéase diagrama JVC CD changer Véase diagrama B Fusible de 15 a BlackJVC Amplifier Subwoofer