JVC KS-FX701 manual Specifications, FM Tuner, AM Tuner

Page 30

SPECIFICATIONS

ENGLISH

AUDIO AMPLIFIER SECTION

Maximum Power Output: Front: 40 watts per channel Rear: 40 watts per channel

Continuous Power Output (RMS):

Front: 16 watts per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.

Rear: 16 watts per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble:±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: KS-FX701/KS-FX601: 2.0 V/20 kΩ load KS-F501: 1.0 V/20 kΩ load

TUNER SECTION

Frequency Range

FM: 87.5 MHz to 108.0 MHz

AM: 531 kHz to 1 602 kHz

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60) Frequency Response:

30 Hz to 16 000 Hz (± 3 dB) Signal-to-Noise Ratio: (Normal tape) 56 dB Stereo Separation: 40 dB

GENERAL

Power Requirement

Operating Voltage: DC 14.4 volts (11 volts to 16 volts allowance)

Grounding System: Negative ground Allowable Working Temperature:

0°C to + 40°C (32°F to 104°F) Dimensions (W x H x D) Installation Size:

182 mm x 52 mm x 150 mm Panel Size:

188 mm x 58 mm x 14 mm

Mass: 1.4 kg (3.1 lbs) (excluding accessories)

Design and specifications subject to change without notice.

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 ∝V/75 Ω)

50 dB Quieting Sensitivity:

16.3dBf (1.8 ∝V/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 ∝V

Selectivity: 30 dB

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to Reset

30

Image 30

Contents Instructions Cassette Receiver KS-FX701/KS-FX601/KS-F501Contents Adjust the sound as you want see pages 12 Turn on the powerAdjust the volume Basic OperationsSelect the band FM1, FM2, FM3 or AM Radio OperationsListening to the radio To search stations of Start searching a stationFM station automatic preset SSM Storing stations in memoryTune into a station of 88.3 MHz Manual presetSelect the FM1 band Press and hold the button for more than 2 seconds211 Tuning into a preset stationSelect the number 1 6 for the preset station you want Select the band FM1, FM2, FM3 or AM youScanning broadcast stations When an FM stereo broadcast is hard to receiveOther convenient tuner functions Selecting FM reception soundInsert a cassette Tape OperationsListening to a tape Select the tape directionFinding the beginning of a tune To fast-forward and rewind a tapeSkipping the blank portions on the tape Other convenient tape functionsProhibiting tape ejection Repeat FunctionIndication For Preset values Sound AdjustmentsSelecting preset sound modes Turning on/off the loudness functionAdjust the level Adjusting the soundSelect the item you want to adjust Indication To do RangeSelecting and storing the sound modes Using the Sound Control MemorySelect the sound mode you want Advanced SCMRecalling the sound modes Canceling Advanced SCM Press and hold SEL for more than 2 secondsStoring your own sound adjustments Setting the clock Other Main FunctionsDisp Selecting the level display Detaching the control panel How to detach the control panelHow to attach the control panel Unlock the control panelInstalling the battery Remote OperationsUsing the remote controller CD Changer Operations Playing CDsSelect the CD automatic changer To fast forward or reverse the track To go to the next track or the previous trackTo go to a particular disc directly Selecting CD playback modes To play back tracks at random Random PlayTo play back tracks repeatedly Repeat Play Select the external component Turn on the connected device and start playing the sourcePreparations Selecting the external component to use Maintenance To extend the lifetime of the unitTroubleshooting Symptoms Causes RemediesFM Tuner SpecificationsHaving Trouble with operation? Please reset your unit AM TunerSound is distorted Before mounting PressFuse blows Unit becomes hotXO³²K Electrical Connections Be sure to ground this unit to the car’s chassisUžul