ENGLISH
Finding the beginning of a tune
Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead or before the current tune.
During playback
To locate a tune ahead of the current tune on the tape
To locate a tune before the current tune on the tape
Specify how many tunes ahead or before the current tune the tune you want is located.
Each time you set the tune, the number changes up to ±9.
Other convenient tape functions
Prohibiting tape ejection
You can prohibit the tape ejection and can “lock” a tape in the cassette compartment.
Press and hold TAPE 2 3 and 0 for more than 2 seconds. “NO EJECT” flashes on the display for about 5 seconds, and the tape is “locked.”
To cancel the prohibition and “unlock” the tape,
press and hold TAPE 2 3 and 0 for more than 2 seconds again. “EJECT OK” flashes again for about 5 seconds, and this time the tape is “unlock.”
Skipping the blank portions on the tape
You can skip blank portions between the tunes. (Blank Skip).
When this function is on, the unit skips blank portions of 15 seconds or more,
1 Press and hold SEL (select) for more than 2 seconds.
When the beginning of the specified tune is located, playback starts automatically.
Notes:
•While locating a specified tune:
–If the tape is rewound to its beginning, playback starts from the beginning of that side.
–If the tape is fast forwarded to the end, it is reversed and played from the beginning of the other side.
•In the following cases, the Multi Music Scan function may not operate correctly.
–Tapes with tunes having long pianissimo passages (very quiet parts) or
–Tapes with short
–Tapes with high level noise or humming between tunes.
2 Select “B. SKIP (blank skip)” with
¢
or 4 
.
3 Select the desired mode with + or
The Blank Skip mode alternates between on
and off.
ON Ô OFF
Note:
•When the tape reaches its end while
12