JVC KS-FX280 manual Storing your own sound adjustments, To reset to the factory settings

	1 Press and hold SEL for more than 2
ENGLISH
	seconds.
	“CLOCK H”, “CLOCK M”, “SCM LINK”,
	“LEVEL”, “B.SKIP” or “EXT IN*” appears on
	the display.
	SEL

*Displayed only when one of the following sources is selected—FM, AM and TAPE.

2 Select “SCM LINK” if not shown on the display.

3 Select the desired mode — “LINK ON” or “LINK OFF”.

4 Finish the setting.

SEL

1 Call up the sound mode you want to adjust.

•See page 15 for details.

SCM

2 Select “BAS” (bass) or “TRE” (treble).

SEL

3 Adjust the bass or treble level.

See page 14 for details.

4 Repeat steps 2 and 3 to adjust the other items.

5 To turn ON/OFF the loudness function.

See page 14 for details.

LOUD

6 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.

Your adjustment made for the selected

sound mode is stored in memory.

SCM

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustment in memory.

•There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again.

7 Repeat the same procedure to store other sound modes.

To reset to the factory settings

Repeat the same procedure and reassign the preset values listed in the table on page 15.

16