JVC KS-FX321 manual Specifications, Rear 17 watts per channel into 4 Ω, FM Tuner, AM Tuner

Page 17

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front: 45 watts per channel

Rear: 45 watts per channel

Continuous Power Output (RMS):

Front: 17 watts per channel into 4 Ω,

40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.

Rear: 17 watts per channel into 4 Ω,

40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 2.0 V/20 kΩ load (250 nWb/m)

TUNER SECTION

Frequency Range

FM: 87.5 MHz to 108.0 MHz

AM: 531 kHz to 1 602 kHz

CASSETTE DECK SECTION

Wow & Flutter: 0.15% (WRMS)

Fast-Wind Time: 190 sec. (C-60)

Frequency Response:

50 Hz to 14 000 Hz (normal tape) Signal-to-Noise Ratio: 52 dB Stereo Separation: 40 dB

GENERAL

Power Requirement

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground

Allowable working temperature:

0˚C to + 40˚C Dimensions (W x H x D) Installation Size:

182 mm x 52 mm x 150 mm

Panel Size: 188 mm x 58 mm x 11 mm Mass: 1.3 kg (excluding accessories)

Design and specifications are subject to change without notice.

ENGLISH

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3dBf (1.8 µV/75 Ω) Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 2.0 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

17

Image 17

Contents §·π-π Contents Control panel Location of the ButtonsDisplay window Display window r t yTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio OperationsSelect the band FM1 3, AM Start searching a stationStoring stations in memory When an FM stereo broadcast is hard to receiveTune in to a station you want while M is flashing Select the FM band FM1 3 you want to store FM stations intoPreset number P1 flashes for a while Select the number 1 6 for the preset station you wantYou can easily tune in to a preset station Tune in to a station of 88.3 MHzListening to a cassette Tape OperationsTo stop play and eject the cassette To fast-wind a tapeAdjusting the sound Sound AdjustmentsSelect the item you want to adjust Adjust the levelTo reset to the factory settings Storing your own sound adjustmentsOther Main Functions Setting the clockTo check the current clock time or change the display mode How to attach the control panel How to detach the control panelYou can detach the control panel when leaving the car ConnectorsPlaying CDs CD Changer OperationsTo check the elapsed playing time To fast forward or reverse the trackTo go to a particular disc directly IndicatorTo playback tracks at random Random Play ModeTo keep the tape clean MaintenanceTo clean the heads Symptoms Causes Remedies TroubleshootingPress the reset button PressRear 17 watts per channel into 4 Ω SpecificationsFM Tuner AM Tuner? uKF* W?łUŠ Ë« ?L?Ž p?O?K?Ž V−¹ ¨p«Ëœ« ’u?B ∑’ËÀπË¬ÿ¥µ‘¥µ-Èßπ’È DA « Ë«∂Õ¥·ºËπ‚≈À-¢Õ·µËß ∂Õ¥·ºß§«§ÿ¡¥÷ß§-π-ß§-∑-Èß Õß ÆUN« l¡¬‡Àµÿ „ÀÈÀËßºŸÈ‡’Ë¬«≠‡ªÁπºŸÈµ‘¥µ-Èß√-· ‰øøÈ ¬¥‘π¢-È«≈√-· 12µ√ß‚«≈∑Ï √∂¬πµÏ¢Õß§ÿ≥‰¡Ë ‰¥È „È√-π’È¨X u ’·¥ßQJA?Ð w Uô« ·d?D « l `O×