JVC KS-FX321 manual Tune in to a station of 88.3 MHz, Preset number P1 flashes for a while

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band.

1 Select the band (FM 1 – 3, AM) you want to store stations into (in this example, FM 1).

Each time you press the button, the FM band

changes as follows:

FM1FM2

FM3

AM

2 Tune in to a station of 88.3 MHz.

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

3 Press and hold the button (in this example, 1) for more than 2 seconds.

Preset number “P1” flashes for a while.

4 Repeat the above procedure to store other stations into other preset numbers.

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Tuning in to a preset station	ENGLISH
You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on pages 6 – 7.

1 Select the band (FM1 – 3, AM).

FM1FM2

FM3

AM

2 Select the number (1 – 6) for the preset station you want.

7 8 9 10 11 12

7