Physical Specifications, 10-5 | Cisco Systems 10000 Series

Chapter 10 1-Port Gigabit Ethernet Half-Height Line Card Overview

Physical Specifications

Table 10-3	LED Description(continued)

LED Label		Color	State	Meaning

LINK		Green	On	Carrier detected; the port is able to pass traffic. This
				LED can also be on if the line card is in internal
				loopback.

			Off	No carrier signal is detected; the negotiation failed, or
				the port is administratively down.

Note Because this line card operates in full-duplex mode, both the RX and TX LEDs can be on at the same time.

Physical Specifications

The 1-port Gigabit Ethernet half-height line card physical specifications appear in Table 10-4.

Table 10-4 1-Port Gigabit Ethernet Half-Height Line Card Physical Specifications

Description	Specifications

Physical dimensions	Height:7.8 in. (19.8 cm)
	Depth:11 in. (27.9 cm)
	Width: 1.3 in. (3.3 cm)

Shipping weight	Approximately 2 lb (0.9kg)

Operating temperature	41oF to 104oF (5oC to 40oC)
	Short-term operating temperature is limited to 131oF (55oC)
	in compliance with Bellcore GR

Relative humidity	Operating—nominal: 5% to 85%
	Operating—short term: 5% to 90%
	Storage: 5% to 95%

Storage temperature	–40oF to 158oF (–40oC to 70C o)

Cisco 10000 Series Routers Line Card Hardware Installation Guide

	OL-6773-04	10-5