![](/images/new-backgrounds/1046559/4655921x1.webp)
*3 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting the AUX+ SETUP Mode” (page 17).
*4 Displayed only when BT IN is set to BT ADAPTER. Refer to “Bluetooth Setting” (page 16).
2 While playing back MP3/WMA/AAC, press 1 or
2 to select the desired folder.
Pressing and holding 1 or
2 will change folders continuously.
3 Press
or
to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
4 To pause playback, press /
/ENT.
Pressing /
/ENT again will resume playback.
5 To eject the disc, press
.
•Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either.
•If the CD does not eject, press and hold for at least 2 seconds.
•The “DISC IN” indicator lights up when a disc is inserted.
•The
•WMA format files that are protected by DRM (Digital Rights Management), AAC format files that have been purchased from iTunes Music Store and files that are
•The track display for MP3/WMA/AAC data playback is the file numbers recorded on the disc.
•The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as described below.
CD mode :
: Only a track is repeatedly played back.
MP3/WMA/AAC mode :
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
M.I.X. (Random Play)
Press 5
in the play or pause mode.
The tracks (files) on the disc will be played back in random sequence.
To cancel M.I.X. play, press 5 again.
CD mode :
: The tracks are played back in random sequence.
MP3/WMA/AAC mode :
: Only files in a folder are played back in random sequence.
: The files are played back in random sequence.
F101 T103
Folder number File number
displaydisplay
•Press VIEW to switch the display. See “Displaying the Text” (page 14) for information about display switching.
Repeat Play
Press
4 to play back repeatedly the track being played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using their recorded titles. For discs without CD Text, searches are made using the track numbers associated with each song.
1 Press /ESC during play.
This will set the search mode.
2 Turn the Rotary encoder
press and
/
/ENT.
This will play the selected track.
•Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode is canceled if no operation is performed for 10 seconds.
•CD text search cannot be made during M.I.X. play.
01GB04CDE9874E.fm
ALPINE