Alpine CDE-9874E, CDE-9872E Lowering Volume Quickly, Setting Time, Listening to Radio

Page 9

68-09359Z38-A_F.book Page 7 Tuesday, September 4, 2007 4:15 PM

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press /MUTE (CDE-9874E only) or MUTE/SETUP (CDE-9872E only) to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing /MUTE (CDE-9874E only) or MUTE/SETUP (CDE-9872E only) again will bring the audio back to its previous level.

Setting Time

1 Press and hold SOUND/SETUP (CDE-9874E only) or MUTE/SETUP (CDE-9872E only) for at least

2 seconds to activate the SETUP mode.

2 Turn the Rotary encoder (CDE-9874E only) or

press and (CDE-9872E only) to select the CLOCK ADJ mode, and then press / /ENT.

The time indication will blink.

3 Turn the Rotary encoder (CDE-9874E only) or

press and (CDE-9872E only) to adjust the hours while the time indication is blinking.

4 When the hour has been adjusted, press / /ENT.

5 Turn the Rotary encoder (CDE-9874E only) or

press and (CDE-9872E only) to adjust the minutes while the time indication is blinking.

6 Press and hold SOUND/SETUP (CDE-9874E only) or MUTE/SETUP (CDE-9872E only) for at least 2 seconds to return to normal mode.

•To synchronize the clock to another clock/watch or radio time

announcement, press and hold / /ENT for at least 2 seconds after setting the “hour.” Minutes will reset to “00”. If the display shows over “30” minutes when you do this, the time will advance one hour.

•Pressing /MUTE (CDE-9874E only) or /AUDIO (CDE-9872E only) will return to the previous mode.

•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Controllable with Remote Control

This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the re- mote-control sensor.

Remote control sensor

CDE-9874E

Controllable with Remote Control

This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the re- mote-control sensor.

Remote control sensor

CDE-9872E

01GB04CDE9874E.fm

Radio

CDE-9874E

SOURCE/

TUNE/A.MEBAND

Preset buttons (1 through 6)

CDE-9872E

SOURCE/

TUNE/A.MEBAND

Preset buttons (1 through 6)

Listening to Radio

1 Press SOURCE/ to select TUNER mode.

2 Press BAND repeatedly until the desired radio band is displayed.

F1 (FM1) F2 (FM2) AM F1 (FM1)

3 Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK

•The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4 Press

or

 

to tune in the desired station.

Holding down

 

or

will change the frequency

continuously.

 

 

 

7-EN

ALPINE CDE-9874E 68-09359Z38-A (EN)

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CDE-9874E 68-09359Z38-AF.book Page 2 Tuesday, September 4, 2007 415 PM Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following CDE-9874E CDE-9872E On handling Compact Discs CD/CD-R/CD-RWTurning Power On and Off Accessory ListAdjusting Volume Getting StartedSetting Time Lowering Volume QuicklyRadio Listening to RadioPresetting Stations Automatically Presetting Stations ManuallyTuning to Preset Stations PlaybackX. Random Play Repeat PlaySearching for CD Text About MP3/WMA/AAC File/Folder Name Search Concerning MP3/WMA/AACQuick Search CDE-9874E only 10-ENSupported playback sampling rates and bit rates 11-ENSetting the Bass Control Sound SettingLeft and Right/Fader Between Front Rear/Loudness/Defeat 12-ENAdjusting the High Pass Filter Setting the Treble Control13-EN Press Band to select the desired treble centre frequencyDisplaying the Text Other FunctionsDisplaying Time 14-EN15-EN Using the AUX Input Terminal CDE-9874E onlySelect Subwoofer Select Subw on or Subw OFF16-EN 17-EN IPod OptionalSearching for a desired Song 18-ENSelected song is played back immediately Select Playlist/Artist/Album/Genre Composer Direct Search FunctionRandom Play Shuffle M.I.X 19-EN20-EN To cancel repeat play, select off with the above procedureRepeat One Song is played back repeatedly RPT off RPT Repeat OneInformation Case of Difficulty21-EN 22-EN Sound is not output from the speakersIPod does not play and no sound is output 23-EN Specifications24-EN Installation and Connections25-EN InstallationRemoval Pull the unit out, keeping it unlocked as you do so26-EN Connections27-EN 01GB05CDE9874E.fm 操作說明 安裝和連接 操作說明 禁止事項 關於使用光碟 （CD/CD-R/CD-RW） 推入前面板的左側，直至其牢固地裝入主機。 用原子筆或類似尖頭物件按一下 RESET。關閉本機電源。 拆下可拆卸式前面板。快速降低音量 設定時間收聽無線電 自動儲存預設電台 手動儲存預設電台調諧至預設電台 按住 TUNE/A.ME 至少 2 秒鐘。重複播放 X. （隨機播放）CD 文字搜尋 快速搜尋 （僅限 CDE-9874E） 關於 MP3/WMA/AAC10-CT 支援的播放取樣頻率和位元率檔案順序 11-CT12-CT 設定低音控制設定高音控制 調整高通濾波器13-CT 顯示時間 顯示文字14-CT VIEW。15-CT （僅限 CDE-9872E）選擇想要的 Setup 選單， 然後按 / /ENT。SOURCE/ ，然後選擇 AUX 模式聆聽便攜式設備。 （僅限 CDE-9872E）更改設定。16-CT IPod （選購） 設定 AUX+ Setup 模式17-CT 設定 AUX Name 模式 （僅限 CDE-9874E）18-CT 搜尋所需歌曲直接搜尋功能 選擇播放清單 / 歌手 / 專輯 / 音樂風格 作曲者19-CT RPT （off） RPT 20-CT21-CT 出現問題時22-CT CD 播放機的顯示底座尺寸 梁架尺寸 23-CT24-CT 安裝和連接CDE-9874E/CDE-9872E 滑入儀表板直到出現喀嗒 25-CT日本汽車 將安裝殼套從主機上拆下 （請參閱第 25 頁的 拆 卸）。至電動天線 至放大器 至車載電話 點火鑰匙 揚聲器 26-CT27-CT Page Alpine CDE-9874E 68-09359Z38-A CT Alpine CDE-9874E 68-09359Z38-A CT

CDE-9872E, CDE-9874E specifications

The Alpine CDE-9874E and CDE-9872E are two standout models in the world of car audio systems, designed to enhance your driving experience with high-quality sound and advanced technological features. Both models showcase Alpine's commitment to superior audio performance, ease of use, and connectivity options.

The Alpine CDE-9874E is equipped with a powerful 4-channel amplifier, delivering 50 watts RMS per channel, ensuring that every note and beat comes through with crystal clarity. It supports a wide range of audio formats, including MP3, WMA, and AAC, which makes it versatile for users who enjoy digital music. The CDE-9874E also includes a built-in CD player, as well as a USB port for direct connection to your smartphone or MP3 player. A notable feature is the Bluetooth connectivity, allowing seamless pairing with smartphones for hands-free calls and audio streaming.

Another remarkable characteristic of the CDE-9874E is its excellent sound customization capabilities. Featuring a 3-band parametric EQ, users can tailor the audio output to their liking, while the Time Correction and Digital Signal Processing (DSP) technologies offer professional-grade sound tuning. The display is user-friendly, with a bright and clear interface that makes navigating between different audio sources and settings a breeze.

On the other hand, the CDE-9872E shares many similarities but includes a few distinct features that set it apart. While lacking Bluetooth, the CDE-9872E still provides a USB connection and supports various digital audio files, appealing to users who prefer wired connections. This model is also optimized for audio performance, with a built-in amplifier that delivers impressive sound quality.

Both models boast a robust build quality, designed to withstand the bumps of the road while maintaining optimal performance. The intuitive user interface allows for quick adjustments while driving, ensuring that your focus remains on the road ahead.

In summary, whether you choose the Alpine CDE-9874E with its advanced Bluetooth capabilities and extensive sound customization options or the CDE-9872E with its solid performance and straightforward design, both models promise to elevate your in-car audio experience to new heights. Enjoy the perfect blend of convenience, performance, and style with these exceptional car stereos.
Top Page Image Contents