Kenwood KDC-DAB41U, KDC-DAB4551U instruction manual Bluetooth Setup, Pairing, Voice TAG, Call Beep

8“ENTER 2” is displayed. When a beep is heard, say the same voice tag as that you said in step 7 within 2 seconds. “COMPLETE” is displayed.

9Press the volume knob to return to step 5.

■Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command.

Bluetooth Setup

1Press and hold the volume knob to enter Bluetooth mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3Turn the volume knob to make a selection, then press to confirm.

■See table below for selection.

■Repeat step 3 until the desired item is selected/activated.

■Press to return to the previous item.

4Hold to finish the procedure.

■To exit Bluetooth mode, press SRC.

	Item	Selectable setting (Preset: *)
PAIRING
	DEVICE SEARCH	Registers a Bluetooth device (pairing).
		(For details, see page 22.)
	PHONE SELECT	Selects a cell-phone connection.
		(For details, see page 23.)
	AUDIO SELECT	Selects a Bluetooth audio player connection. (For details, see page 23.)
	S-DVC SELECT	(For details, see page 22.)
	DEVICE DELETE	Cancel registration of the Bluetooth device.
		1. Turn the volume knob to select the Bluetooth device, then press to confirm.
		2. Turn the volume knob to select “YES”, then press to confirm.
SMS DOWNLOAD		Download a short message. (For details, see page 26.)
VOICE TAG
	PB NAME EDIT	Registers voice for voice recognition and voice to select the Phone number category in Phone book.
	PN TYPE EDIT	(For details, see page 23.)
DETAILED SET
	PIN CODE EDIT	Specify the PIN code required when registering this unit using the Bluetooth device. By default, “0000” is
		specified.
		1. Turn the volume knob to select the number.
		■ To move to the next digit, press ¢.
		■ To delete the last digit, press 4.
		2. Press the volume knob to register a PIN code
	AUTO ANSWER	OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ;
		1 – 8 * –99: Automatically answers the phone call after lapse of 1 – 99 seconds.
	BT HF/AUDIO	FRONT *: Outputs audio from the front-left and front-right speakers. ; ALL: Outputs audio from the all
		speakers.
	CALL BEEP	ON *: Outputs a beep from the speaker upon reception of an incoming call. ; OFF: Cancels.
	BT F/W UPDATE	Display the firmware version and update the firmware.

24 English