Safety
WARNING
Stop the car before operating the unit.
Important to know...
■To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
■Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident.
■Condensation: When the car is air- conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.
■The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment.
■If you experience problems during installation, consult your Kenwood dealer.
■When you purchase external components, check with your Kenwood dealer to make sure that they work with your model and in your area.
Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit.
Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth.
Preparation
How to attach/detach the faceplate
1 
1
2
2
■Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.
■Keep the faceplate in its casing while detached.
■The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
■To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.
How to reset your unit
If this unit fails to operate
1
properly, press the reset
button.
2The unit returns to factory
settings when the reset button is pressed.
3
Reset button
Remote controller
English 3