Listening to the DAB
Hold to turn on or off the Traffic Information function.
LIST
UPDATE
■Changes to DAB source if other than DAB source has been selected.
■Press briefly to enter DAB service search mode
■Updates DAB search list information or stops update if pressed and held.
■Hold for about 2 seconds to memorize the current service or the selected Program Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.)
■Press briefly to recall memorized service (or Program Type after entering the PTY search mode).
1PressSRC to select “DAB”.
2Press BAND repeatedly to select a band (DB1, DB2, DB3).
3Press and hold 4 / ¢ to search for an ensemble.
4Press 4 / ¢ to select an ensemble, service or component to listen.
■Press ¢ to receive ensemble, then select service > component in sequence. When 4 is pressed, primary service is selected when ensemble changes and primary is selected when service changes.
| Ensemble |
|
| ||||
: Press 4. |
|
| Service | ||||
|
| ||||||
: Press ¢. |
|
|
|
| Primary | ||
|
|
|
| ||||
|
|
|
| Secondary | |||
|
|
|
| ||||
|
|
| Service | ||||
|
|
| |||||
|
|
| Service | ||||
|
|
|
Selecting a service
•The service list information must be obtained first.
1Press DAB to enter Service Search mode. “SERVICE LIST” appears.
8 English
2Turn the volume knob to select a service, then press to confirm.
■To skips character, press 4/ ¢.
■To cancel the Service Search mode, press and hold .
■“NO LIST” is displayed when no service list is obtained.
Alphabet Search for service
1Press DAB to enter Service Search mode. “SERVICE LIST” appears.
2Pressto enter alphabet search mode. “< ABCDEFG >” appears.
3Turn the volume knob to select the character to be searched for.
■To move to the next row, press BAND.
■To skips character, press 4/ ¢.
4Press the volume knob to start searching. ■ To return to the Service Search mode, press
.
■ To cancel the Service Search mode, press and hold .
■ To search for a character other than A to Z and 0 to 9, enter only “ * ”.
Updating Service List information
Press and hold DAB to start Service list update.