Alpine CDA-9833 owner manual Recalling the Stored Crossover Settings, WAY System, 16-EN

Page 18

Adjusting and Storing the Crossover Settings

Before performing the following procedures, refer to “About the Crossover” (page 15).

1 Press and hold MENU for at least 2 seconds.

2 Press MENU to select X-OVER.

2 WAY System

3 Press BAND/TEL. to select desired parameter.

LOW (LO) → MID → HIGH → LOW (LO)

(Subwoofer) (REAR) (FRONT) (Subwoofer)

4 Press gor fto select desired cut-off frequency point (cross over point).

Adjustable frequency bands: 20Hz to 200Hz (in 1/3 octave steps)

5 Press SOURCE/POWER to select desired slope.

Adjustable slope: 0 (FLAT (OFF)), 1 (6 dB/oct.), 2 (12 dB/oct.), 3 (18 dB/oct.), 4 (24 dB/oct.)

6 Turn the Rotary encoder to select the desired output level.

Adjustable output level: -12 to 0 dB.

To store the adjusted contents

1)Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the adjusted contents.

7 For setting another channel, repeat the steps 3 to 6.

8 Press the Rotary encoder to confirm the adjusted contents.

The adjusted contents are not stored if the Rotary encoder is not pressed.

9 After setting, press MENU to select RETURN.

The unit returns to normal mode.

Pressing and holding MENU for at least 2 seconds will return to normal mode.

•Crossover mode is automatically canceled if no operation is performed within 15 seconds.

3 WAY System

3 Press BAND/TEL. to select desired parameter.

LOW (LO) → MID-L → MID-H → HIGH → LOW (LO)

4 Press gor fto select desired cut-off frequency point (cross over point).

Adjustable frequency bands:

LOW : 20Hz to 200Hz (in 1/3 octave steps)

MID-L : 20Hz to 200Hz (in 1/3 octave steps)

MID-H : 20Hz to 20kHz (in 1/3 octave steps)

HIGH : 1kHz to 20kHz (in 1/3 octave steps)

5 Press SOURCE/POWER to select the desired slope.

Adjustable slope: 0 (FLAT (OFF))*, 1 (6 dB/oct.), 2 (12 dB/oct.), 3 (18 dB/oct.), 4 (24 dB/oct.)

*FLAT can be set for the HIGH slope only when USER'S is selected in "Setting the Response Slope for the High Range Speaker (TW SETUP)" (page 25). Depending on the response characteristics of the speaker, care should be taken when setting the response slope to FLAT, as speaker damage may result. A message is displayed when the response slope for the high range speaker is set to FLAT.

6 Turn the Rotary encoder to select the desired output level.

Adjustable output level: -12 to 0 dB.

To store the adjusted contents

1)Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the adjusted contents.

7 For setting another channel, repeat the steps 3 to 6.

8 Press the Rotary encoder to confirm the adjusted contents.

The adjusted contents are not stored if the Rotary encoder is not pressed.

9 After setting, press MENU to select RETURN.

The unit returns to normal mode.

Pressing and holding MENU for at least 2 seconds will return to normal mode.

•About the 2way/3way system

You can switch to 2way/3way system mode with the 2way/3way switch on the bottom of the unit (pages 40 to 42).

When setting to “3 WAY ”:

The unit can be operated in a 3 way system.

F/R Sub-W

When setting to “F/R/Sub-W ”:

 

The unit can be operated in a 2 way system.

3WAY

•Crossover mode is automatically canceled if no operation is performed within 15 seconds.

Recalling the Stored Crossover Settings

1 Press and hold MENU for at least 2 seconds.

2 Press MENU to select X-OVER.

3 Press any one of the preset buttons (1 through

6)that has your desired crossover settings in memory.

4 Press MENU to select RETURN.

The unit returns to normal mode.

Pressing and holding MENU for at least 2 seconds will return to normal mode.

•Crossover mode is automatically canceled if no operation is performed within 15 seconds.

16-EN

Page 17 Page 19
Image 18
Page 17 Page 19
Contents CDA-9835 CDA-9833 CHA-S634 CHA-1214CHM-S630Contents Installation and Connections Operating Instructions Product Cleaning On handling Compact Discs CD/CD-R/CD-RW Getting Started Turning Power On and OffSetting Time CDA-9833 only Initial System Start-UpAdjusting Volume Display Tilt AdjustmentSwitching the Display modes CDA-9835 only Lowering Volume QuicklyRadio To pause playback, press -/J CD / MP3 / WMAPress gor fto select the desired track file To eject the disc, press cPlaying back a Playlist 10-ENX. Random Play Press 5 in the play or pause modeRepeat Play 11-ENQuick Search Scanning ProgramsSearching from CD Text About MP3/WMATerminology 13-ENAdjusting and Storing the Equalizer Curve Sound SettingEqualizer Presets 14-ENAbout the Crossover Way modeRecalling the Stored Equalizer Curve 15-ENRecalling the Stored Crossover Settings WAY System16-EN Example 1. Listening Position Front Left Seat About Time CorrectionBass Focus Example 2. Listening Position All SeatsExample setting for steps 4 18-ENPress BAND/TEL. to select a speaker to be adjusted Adjusting and Storing the Time CorrectionSetting the MX Mode Press Rotary encoder to return to normal mode20-EN Other FunctionsDisplaying the Title/Text Press TitleTitling Discs/Stations 21-ENErasing Disc Title/Station Title Blackout Mode On and OffSetting an Amplifier Link Displaying TimeIf you want to use colors other than the above Setting the Multicolor IlluminationVerifying the Software Version 23-EN24-EN About i-PersonalizeData Downloading File name of download data shall be AW*****.MP3Sound Customizing 25-ENVisual Customizing External Device26-EN XM Radio Optional Receiving XM Channels with the XM Receiver Optional27-EN Receiving Stored XM Channels Storing XM Channel PresetsChecking the XM Radio ID Number Channel/Category Search FunctionChanging the Display Setting the Tuning MethodSetting the Auxiliary Data Field Display 29-EN30-EN Return to normal modeIncoming Calls Menu f Rotary 9 FCalling SMS Short Message Service OperationCalling by using the Speed Dial Calling by the address bookPlaying MP3 Files with the CD Changer Optional Changer OptionalControlling CD Changer Optional Multi-Changer Selection OptionalOperating the Audio Processor Remote ControlControls on Remote Control 33-ENCase of Difficulty Battery ReplacementInformation BasicIndication for CD Player 35-ENIndication for XM Radio Mode Indication for CD Changer36-EN Specifications 37-ENInstallation and Connections 38-ENRemoval Installation39-EN Slide the mounting sleeve into the dashboardConnections 40-ENAmplifier Link Connector 41-EN42-EN To prevent noise/interference in the audio systemLimited Warranty ALPINE-1

CDA-9833 specifications

The Alpine CDA-9833 is a quality car audio head unit that has garnered attention for its impressive range of features and sound performance. Designed for car enthusiasts and casual listeners alike, the CDA-9833 delivers a robust set of specifications aimed at enhancing the in-car listening experience.

One of the standout features of the CDA-9833 is its flexibility in audio playback. It supports CD playback, MP3, and WMA formats, making it easy to enjoy your favorite tunes from various sources. The unit is also equipped with a built-in radio tuner, offering AM and FM bands, which allows users to access a wide range of radio stations.

Connectivity is a significant strength of the CDA-9833. It includes a front auxiliary input, providing an easy way to connect external devices such as smartphones or portable media players. This feature allows users to play their digital music libraries seamlessly. Moreover, the head unit is compatible with Alpine's optional Bluetooth adapter, enabling hands-free calling and wireless music streaming for a more modern and convenient experience.

When it comes to sound quality, the CDA-9833 excels with a high-voltage preamp output. The unit features a 4V preamp output for the front, rear, and subwoofer channels, allowing for cleaner and more powerful sound delivery to external amplifiers. This characteristic is particularly beneficial for users looking to build a more extensive sound system.

The CDA-9833 also includes a range of sound customization options. Its built-in 9-band graphic equalizer allows users to fine-tune audio frequencies according to their preference, ensuring an optimal listening experience tailored to individual tastes. Additionally, the unit features a digital time correction function, which helps to align sound waves reaching the listener's ears, enhancing spatial imaging and creating a more immersive experience.

The intuitive interface of the CDA-9833 is another highlight. It features a bright, easy-to-read display and user-friendly controls, allowing for quick navigation through playlists and settings. The unit’s aesthetic is appealing, with a sleek design that fits well into most car interiors.

In summary, the Alpine CDA-9833 stands out as an impressive head unit that combines functionality, sound quality, and convenience. Its versatile playback options, strong connectivity features, and extensive sound customization capabilities make it an excellent choice for any car audio enthusiast looking to upgrade their in-car entertainment system. Whether you are hitting the road for a long drive or just commuting, the CDA-9833 ensures that your musical experience is nothing short of exceptional.
Top Page Image Contents