Alpine CDA-9833 Erasing Disc Title/Station Title, Displaying Time, Blackout Mode On and Off

Page 24

Erasing Disc Title/Station Title

1 Press TITLE to select the Title Display. Then,

press again and hold for at least 2 seconds.

• For details, see asterisk 2 of “Displaying the Title/Text” (page 20).

2 Press and hold -/Jfor at least 2 seconds. The title in the display will blink.

3 Press gor frepeatedly until the title you want to erase is displayed.

4 Press and hold -/Jfor at least 2 seconds to erase the title displayed.

5 Press TITLE to cancel the title erasing mode.

•You cannot erase CD-TEXT.

•"NO DATA" is displayed for 2 seconds if the title is not input in step 2, or if all titles are erased in step 4.

Displaying Time

Press TITLE repeatedly until the time is displayed.

Each press changes the display.

For details, see “Displaying the Title/Text” (page 20).

•Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.

•When the power is off but the ignition key is on, press TITLE to display the time. (CDA-9833 only)

Blackout Mode On and Off

When Blackout mode is turned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality.

Press and hold DISP/B.OUT for at least 2 seconds to activate the blackout mode.

The display will turn off.

•If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode.

To cancel Blackout mode, press and hold DISP/B.OUT for at least 2 seconds.

Setting an Amplifier Link

With an external Amplifier Link compatible amplifier MRD-M501or MRD-M301 is connected, the amplifier settings are adjustable from the head unit. A maximum of 8 external amplifiers can be adjusted.

1 Press and hold MENU for at least 2 seconds.

2 Press MENU to select A-Link.

3 Press gor fto select AMP-ID (AMP1 to 8), or

BASS VOLUME.

To set the BASS VOLUME

4 Turn the Rotary encoder to adjust the level.

5 When the adjustment has been completed, press MENU to select RETURN.

The unit returns to normal mode.

Pressing and holding MENU for at least 2 seconds will return to normal mode.

To set the Amplifier

4 Press BAND/TEL. to select from the following setting items to be adjusted.

INPUT → LOW PASS → SUBSONIC → P-EQ → BASS COMP

→TCR → PHASE → TURN ON DELAY→ OUTPUT DISABLE (SAFE) → INPUT

5 Turn the Rotary encoder to change the settings.

6 Press the Rotary encoder if there are other settings to be changed.

Repeat steps 5 and 6 (above).

7 Repeat steps 4 to 6 (above) if other items need to be adjusted.

To set another amplifier, return to the step 3.

To store the adjusted contents

1) While adjusting the mode, press either button (1 or 2) for at least 2 seconds.

The adjusted contents are stored.

To recall adjusted and stored contents

1)While adjusting the mode, press either button (1 or 2). The adjusted and stored contents are recalled.

8 When adjustment has been completed, press MENU to select RETURN.

The unit returns to normal mode.

Pressing and holding MENU for at least 2 seconds will return to normal mode.

To easily recall adjusted and stored contents

1)Press MENU to select A-Link.

2)Press gor fto select AMP 1 to 8.

3)Turn the Rotary encoder to select Preset 1 or Preset 2.

4)Press MENU to select RETURN. The unit returns to normal mode.

Pressing and holding MENU for at least 2 seconds will return to normal mode.

•For details of each of the settings, refer to the Owner's Manual of the external amplifier.

•If amplifier settings are made on the unit, do not then change the setting with the amplifier buttons as the amplifier display may not match the operations of the unit.

•"No Link" is displayed if the amplifier is removed or its power cannot be turned on, etc.

•If multiple amplifiers are connected to this unit, set a different ID on each amplifier. Otherwise the display may flicker.

22-EN

Page 23 Page 25
Image 24
Page 23 Page 25
Contents CDA-9835 CDA-9833 CHA-S634 CHA-1214CHM-S630Contents Installation and Connections Operating Instructions Product Cleaning On handling Compact Discs CD/CD-R/CD-RW Turning Power On and Off Setting Time CDA-9833 onlyGetting Started Initial System Start-UpDisplay Tilt Adjustment Switching the Display modes CDA-9835 onlyAdjusting Volume Lowering Volume QuicklyRadio CD / MP3 / WMA Press gor fto select the desired track fileTo pause playback, press -/J To eject the disc, press cPlaying back a Playlist 10-ENPress 5 in the play or pause mode Repeat PlayX. Random Play 11-ENScanning Programs Searching from CD TextQuick Search About MP3/WMATerminology 13-ENSound Setting Equalizer PresetsAdjusting and Storing the Equalizer Curve 14-ENWay mode Recalling the Stored Equalizer CurveAbout the Crossover 15-ENRecalling the Stored Crossover Settings WAY System16-EN About Time Correction Bass FocusExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsExample setting for steps 4 18-ENAdjusting and Storing the Time Correction Setting the MX ModePress BAND/TEL. to select a speaker to be adjusted Press Rotary encoder to return to normal modeOther Functions Displaying the Title/Text20-EN Press TitleTitling Discs/Stations 21-ENBlackout Mode On and Off Setting an Amplifier LinkErasing Disc Title/Station Title Displaying TimeSetting the Multicolor Illumination Verifying the Software VersionIf you want to use colors other than the above 23-ENAbout i-Personalize Data Downloading24-EN File name of download data shall be AW*****.MP3Sound Customizing 25-ENVisual Customizing External Device26-EN XM Radio Optional Receiving XM Channels with the XM Receiver Optional27-EN Storing XM Channel Presets Checking the XM Radio ID NumberReceiving Stored XM Channels Channel/Category Search FunctionSetting the Tuning Method Setting the Auxiliary Data Field DisplayChanging the Display 29-ENReturn to normal mode Incoming Calls30-EN Menu f Rotary 9 FSMS Short Message Service Operation Calling by using the Speed DialCalling Calling by the address bookChanger Optional Controlling CD Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalRemote Control Controls on Remote ControlOperating the Audio Processor 33-ENBattery Replacement InformationCase of Difficulty BasicIndication for CD Player 35-ENIndication for XM Radio Mode Indication for CD Changer36-EN Specifications 37-ENInstallation and Connections 38-ENInstallation 39-ENRemoval Slide the mounting sleeve into the dashboardConnections 40-ENAmplifier Link Connector 41-EN42-EN To prevent noise/interference in the audio systemLimited Warranty ALPINE-1

CDA-9833 specifications

The Alpine CDA-9833 is a quality car audio head unit that has garnered attention for its impressive range of features and sound performance. Designed for car enthusiasts and casual listeners alike, the CDA-9833 delivers a robust set of specifications aimed at enhancing the in-car listening experience.

One of the standout features of the CDA-9833 is its flexibility in audio playback. It supports CD playback, MP3, and WMA formats, making it easy to enjoy your favorite tunes from various sources. The unit is also equipped with a built-in radio tuner, offering AM and FM bands, which allows users to access a wide range of radio stations.

Connectivity is a significant strength of the CDA-9833. It includes a front auxiliary input, providing an easy way to connect external devices such as smartphones or portable media players. This feature allows users to play their digital music libraries seamlessly. Moreover, the head unit is compatible with Alpine's optional Bluetooth adapter, enabling hands-free calling and wireless music streaming for a more modern and convenient experience.

When it comes to sound quality, the CDA-9833 excels with a high-voltage preamp output. The unit features a 4V preamp output for the front, rear, and subwoofer channels, allowing for cleaner and more powerful sound delivery to external amplifiers. This characteristic is particularly beneficial for users looking to build a more extensive sound system.

The CDA-9833 also includes a range of sound customization options. Its built-in 9-band graphic equalizer allows users to fine-tune audio frequencies according to their preference, ensuring an optimal listening experience tailored to individual tastes. Additionally, the unit features a digital time correction function, which helps to align sound waves reaching the listener's ears, enhancing spatial imaging and creating a more immersive experience.

The intuitive interface of the CDA-9833 is another highlight. It features a bright, easy-to-read display and user-friendly controls, allowing for quick navigation through playlists and settings. The unit’s aesthetic is appealing, with a sleek design that fits well into most car interiors.

In summary, the Alpine CDA-9833 stands out as an impressive head unit that combines functionality, sound quality, and convenience. Its versatile playback options, strong connectivity features, and extensive sound customization capabilities make it an excellent choice for any car audio enthusiast looking to upgrade their in-car entertainment system. Whether you are hitting the road for a long drive or just commuting, the CDA-9833 ensures that your musical experience is nothing short of exceptional.
Top Page Image Contents