Alpine CDA-9833 Installation, 39-EN, Removal, Slide the mounting sleeve into the dashboard

Page 41

Installation

Metal plate

Detachable

Front panel

Caution

When you install this unit in your car, do not remove the detachable front panel.

If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.

Caution

Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.

Air ventilation hole

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-9835/CDA- 9833. Connect all other leads of the CDA-9835/CDA- 9833 according to details described in the CONNECTlONS section.

3

Lock Pin

Slide the CDA-9835/CDA-9833 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel.

1

(Rear of CDA-9835/CDA-9833)

Mounting Sleeve (Included)

Dashboard

this unit

Removal

1Remove the detachable front panel.

2Use a small screwdriver (or similar tool) to push the locking pins to the “up” position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

3Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Slide the mounting sleeve into the dashboard.

2

Screw

Hex Nut (M5)

Face Plate

*2

Bolt Stud

Metal

Mounting

Strap

*1

this unit

Ground Lead

Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle's chassis.

•For the screw marked “*2”, use an appropriate screw for the chosen mounting location.

Screws (M5 ⋅ 8) (Included)

this unit

Ground Lead

*3

Mounting Bracket

•Secure the ground lead of the unit to a clean metal spot using a screw (*3) already attached to the vehicle's chassis.

39-EN

Page 40 Page 42
Image 41
Page 40 Page 42
Contents CDA-9835 CDA-9833 CHA-1214CHM-S630 CHA-S634Contents Installation and Connections Operating Instructions Product Cleaning On handling Compact Discs CD/CD-R/CD-RW Setting Time CDA-9833 only Turning Power On and OffGetting Started Initial System Start-UpSwitching the Display modes CDA-9835 only Display Tilt AdjustmentAdjusting Volume Lowering Volume QuicklyRadio Press gor fto select the desired track file CD / MP3 / WMATo pause playback, press -/J To eject the disc, press c10-EN Playing back a PlaylistRepeat Play Press 5 in the play or pause modeX. Random Play 11-ENSearching from CD Text Scanning ProgramsQuick Search About MP3/WMA13-EN TerminologyEqualizer Presets Sound SettingAdjusting and Storing the Equalizer Curve 14-ENRecalling the Stored Equalizer Curve Way modeAbout the Crossover 15-EN16-EN Recalling the Stored Crossover SettingsWAY System Bass Focus About Time CorrectionExample 1. Listening Position Front Left Seat Example 2. Listening Position All Seats18-EN Example setting for steps 4Setting the MX Mode Adjusting and Storing the Time CorrectionPress BAND/TEL. to select a speaker to be adjusted Press Rotary encoder to return to normal modeDisplaying the Title/Text Other Functions20-EN Press Title21-EN Titling Discs/StationsSetting an Amplifier Link Blackout Mode On and OffErasing Disc Title/Station Title Displaying TimeVerifying the Software Version Setting the Multicolor IlluminationIf you want to use colors other than the above 23-ENData Downloading About i-Personalize24-EN File name of download data shall be AW*****.MP325-EN Sound Customizing26-EN Visual CustomizingExternal Device 27-EN XM Radio OptionalReceiving XM Channels with the XM Receiver Optional Checking the XM Radio ID Number Storing XM Channel PresetsReceiving Stored XM Channels Channel/Category Search FunctionSetting the Auxiliary Data Field Display Setting the Tuning MethodChanging the Display 29-ENIncoming Calls Return to normal mode30-EN Menu f Rotary 9 FCalling by using the Speed Dial SMS Short Message Service OperationCalling Calling by the address bookControlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalControls on Remote Control Remote ControlOperating the Audio Processor 33-ENInformation Battery ReplacementCase of Difficulty Basic35-EN Indication for CD Player36-EN Indication for XM Radio ModeIndication for CD Changer 37-EN Specifications38-EN Installation and Connections39-EN InstallationRemoval Slide the mounting sleeve into the dashboard40-EN Connections41-EN Amplifier Link ConnectorTo prevent noise/interference in the audio system 42-ENALPINE-1 Limited Warranty

CDA-9833 specifications

The Alpine CDA-9833 is a quality car audio head unit that has garnered attention for its impressive range of features and sound performance. Designed for car enthusiasts and casual listeners alike, the CDA-9833 delivers a robust set of specifications aimed at enhancing the in-car listening experience.

One of the standout features of the CDA-9833 is its flexibility in audio playback. It supports CD playback, MP3, and WMA formats, making it easy to enjoy your favorite tunes from various sources. The unit is also equipped with a built-in radio tuner, offering AM and FM bands, which allows users to access a wide range of radio stations.

Connectivity is a significant strength of the CDA-9833. It includes a front auxiliary input, providing an easy way to connect external devices such as smartphones or portable media players. This feature allows users to play their digital music libraries seamlessly. Moreover, the head unit is compatible with Alpine's optional Bluetooth adapter, enabling hands-free calling and wireless music streaming for a more modern and convenient experience.

When it comes to sound quality, the CDA-9833 excels with a high-voltage preamp output. The unit features a 4V preamp output for the front, rear, and subwoofer channels, allowing for cleaner and more powerful sound delivery to external amplifiers. This characteristic is particularly beneficial for users looking to build a more extensive sound system.

The CDA-9833 also includes a range of sound customization options. Its built-in 9-band graphic equalizer allows users to fine-tune audio frequencies according to their preference, ensuring an optimal listening experience tailored to individual tastes. Additionally, the unit features a digital time correction function, which helps to align sound waves reaching the listener's ears, enhancing spatial imaging and creating a more immersive experience.

The intuitive interface of the CDA-9833 is another highlight. It features a bright, easy-to-read display and user-friendly controls, allowing for quick navigation through playlists and settings. The unit’s aesthetic is appealing, with a sleek design that fits well into most car interiors.

In summary, the Alpine CDA-9833 stands out as an impressive head unit that combines functionality, sound quality, and convenience. Its versatile playback options, strong connectivity features, and extensive sound customization capabilities make it an excellent choice for any car audio enthusiast looking to upgrade their in-car entertainment system. Whether you are hitting the road for a long drive or just commuting, the CDA-9833 ensures that your musical experience is nothing short of exceptional.
Top Page Image Contents