Alpine CDA-9833 owner manual Installation and Connections, 38-EN

Page 40

Installation and Connections

Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury.

If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

Be sure to disconnect the cable from the (–) battery post before installing your CDA-9835/CDA-9833. This will reduce any chance of damage to the unit in case of a short-circuit.

Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.

When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDA-9835/CDA-9833 to the fuse box, make sure the fuse for the intended circuit of the CDA-9835/CDA-9833 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

The CDA-9835/CDA-9833 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN: PLACE OF PURCHASE:

38-EN

Image 40
Contents CDA-9835 CDA-9833 CHA-S634 CHA-1214CHM-S630Contents Installation and Connections Operating Instructions Product Cleaning On handling Compact Discs CD/CD-R/CD-RW Turning Power On and Off Setting Time CDA-9833 onlyGetting Started Initial System Start-UpDisplay Tilt Adjustment Switching the Display modes CDA-9835 onlyAdjusting Volume Lowering Volume QuicklyRadio CD / MP3 / WMA Press gor fto select the desired track fileTo pause playback, press -/J To eject the disc, press cPlaying back a Playlist 10-ENPress 5 in the play or pause mode Repeat PlayX. Random Play 11-ENScanning Programs Searching from CD TextQuick Search About MP3/WMATerminology 13-ENSound Setting Equalizer PresetsAdjusting and Storing the Equalizer Curve 14-ENWay mode Recalling the Stored Equalizer CurveAbout the Crossover 15-ENWAY System Recalling the Stored Crossover Settings16-EN About Time Correction Bass FocusExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsExample setting for steps 4 18-ENAdjusting and Storing the Time Correction Setting the MX ModePress BAND/TEL. to select a speaker to be adjusted Press Rotary encoder to return to normal modeOther Functions Displaying the Title/Text20-EN Press TitleTitling Discs/Stations 21-ENBlackout Mode On and Off Setting an Amplifier LinkErasing Disc Title/Station Title Displaying TimeSetting the Multicolor Illumination Verifying the Software VersionIf you want to use colors other than the above 23-ENAbout i-Personalize Data Downloading24-EN File name of download data shall be AW*****.MP3Sound Customizing 25-ENExternal Device Visual Customizing26-EN Receiving XM Channels with the XM Receiver Optional XM Radio Optional27-EN Storing XM Channel Presets Checking the XM Radio ID NumberReceiving Stored XM Channels Channel/Category Search FunctionSetting the Tuning Method Setting the Auxiliary Data Field DisplayChanging the Display 29-ENReturn to normal mode Incoming Calls30-EN Menu f Rotary 9 FSMS Short Message Service Operation Calling by using the Speed DialCalling Calling by the address bookChanger Optional Controlling CD Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalRemote Control Controls on Remote ControlOperating the Audio Processor 33-ENBattery Replacement InformationCase of Difficulty BasicIndication for CD Player 35-ENIndication for CD Changer Indication for XM Radio Mode36-EN Specifications 37-ENInstallation and Connections 38-ENInstallation 39-ENRemoval Slide the mounting sleeve into the dashboardConnections 40-ENAmplifier Link Connector 41-EN42-EN To prevent noise/interference in the audio systemLimited Warranty ALPINE-1

CDA-9833 specifications

The Alpine CDA-9833 is a quality car audio head unit that has garnered attention for its impressive range of features and sound performance. Designed for car enthusiasts and casual listeners alike, the CDA-9833 delivers a robust set of specifications aimed at enhancing the in-car listening experience.

One of the standout features of the CDA-9833 is its flexibility in audio playback. It supports CD playback, MP3, and WMA formats, making it easy to enjoy your favorite tunes from various sources. The unit is also equipped with a built-in radio tuner, offering AM and FM bands, which allows users to access a wide range of radio stations.

Connectivity is a significant strength of the CDA-9833. It includes a front auxiliary input, providing an easy way to connect external devices such as smartphones or portable media players. This feature allows users to play their digital music libraries seamlessly. Moreover, the head unit is compatible with Alpine's optional Bluetooth adapter, enabling hands-free calling and wireless music streaming for a more modern and convenient experience.

When it comes to sound quality, the CDA-9833 excels with a high-voltage preamp output. The unit features a 4V preamp output for the front, rear, and subwoofer channels, allowing for cleaner and more powerful sound delivery to external amplifiers. This characteristic is particularly beneficial for users looking to build a more extensive sound system.

The CDA-9833 also includes a range of sound customization options. Its built-in 9-band graphic equalizer allows users to fine-tune audio frequencies according to their preference, ensuring an optimal listening experience tailored to individual tastes. Additionally, the unit features a digital time correction function, which helps to align sound waves reaching the listener's ears, enhancing spatial imaging and creating a more immersive experience.

The intuitive interface of the CDA-9833 is another highlight. It features a bright, easy-to-read display and user-friendly controls, allowing for quick navigation through playlists and settings. The unit’s aesthetic is appealing, with a sleek design that fits well into most car interiors.

In summary, the Alpine CDA-9833 stands out as an impressive head unit that combines functionality, sound quality, and convenience. Its versatile playback options, strong connectivity features, and extensive sound customization capabilities make it an excellent choice for any car audio enthusiast looking to upgrade their in-car entertainment system. Whether you are hitting the road for a long drive or just commuting, the CDA-9833 ensures that your musical experience is nothing short of exceptional.