Alpine CDE-9873 Audio, IPod, Indication for CD Player, Indication for iPod Mode, 21-EN

Page 23

Audio

The sound is not output from the speakers.

•Unit has no output signal of the internal amplifier. - POWER IC is switched to “POW ON” (page 16).

iPod

iPod does not play and no sound is output.

•The iPod has not been recognized.

-Reset this unit and the iPod. Refer to “Initial System Start-Up” (page 6). To reset the iPod, refer to the Owner’s Manual of the iPod.

Indication for CD Player

•Protective circuit is activated due to high temperature.

-The indication will disappear when the temperature returns to normal operating range.

•No CD is inserted.

-Insert a CD.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

Press the button again for at least 2 seconds.

If the disc still does not eject, consult your Alpine dealer.

•Mechanism error.

1) Press the button and eject the CD.

If not ejecting, consult your Alpine dealer.

2) When the error indication remains after ejecting, press the button again.

If the error indication still does not turn off after pressing the button for a few times, consult your Alpine dealer.

•When “ERROR” is displayed:

If the disc cannot be ejected by pressing , press the RESET switch (refer to page 6) and press again.

If the disc still cannot be ejected, consult your Alpine dealer.

•A copy-protected WMA file was played back.

-You can only play back non-copy-protected files.

•A sampling rate/bit rate not supported by the unit is used.

-Use a sampling rate/bit rate that is supported by the unit.

Indication for iPod Mode

•The iPod is not connected.

-Make sure the iPod is correctly connected (refer to “Connections”).

Make sure the cable is not bent excessively.

•There are no songs in the iPod.

-Download songs to the iPod and connect to this unit.

•There is no podcast data in the iPod.

-Download podcast data to the iPod and connect to this unit.

•Communication error

-Turn the ignition key off, and then set to ON again.

-Check the display by reconnecting between the iPod and this unit, using the iPod cable.

•Caused by the iPod Software Version not being compatible with this unit.

-Update the iPod Software Version to be compatible with this unit.

21-EN

Page 22 Page 24
Image 23
Page 22 Page 24
Contents CDE-9873 Page Contents Operating Instructions Precautions Moisture Condensation Product CleaningTemperature MaintenanceNever Attempt the Following Installation LocationDisc Cleaning Disc AccessoriesAbout media that can be played To customers using CD-R/CD-RWOn handling Compact Discs CD/CD-R/CD-RW Initial System Start-Up Turning Power On and OffAdjusting Volume Getting StartedListening to Radio Lowering Volume QuicklySetting Time RadioPlayback Presetting Stations ManuallyPresetting Stations Automatically Tuning to Preset StationsSearching from CD Text X. Random PlayRepeat Play 10-EN File Name Search mode Press Or 2 to select another FolderQuick Search About MP3/WMA/AAC11-EN TerminologyLeft and Right/Fader Between Front Rear/Defeat Sound SettingSetting the Bass Control Setting the Treble Level Setting the Treble ControlAdjusting the High Pass Filter Setting the Treble Center Frequency14-EN Other FunctionsDisplaying the Text Displaying Time15-EN Sound CustomizingVisual Customizing 16-EN External DeviceIPods usable with this unit IPod OptionalSearching for a desired Song 17-EN18-EN Direct Search Function19-EN Random Play Shuffle M.I.XRadio InformationCase of Difficulty BasicIndication for CD Player Indication for iPod ModeAudio IPod22-EN Specifications23-EN Do not Damage Pipe or Wiring When Drilling Holes24-EN InstallationPull the unit out, keeping it unlocked as you do so Install the detachable front panel Removal25-EN Japanese CAR26-EN Connections27-EN Page This Warranty does not cover the following Limited WarrantyContenu Mode d’emploi Avertissement Précautions Disque endommagé Nettoyage du produitTempérature Condensation d’humiditéInsertion des disques Emplacement de montageAu sujet des accessoires pour disque Ne tentez jamais d’effectuer les opérations suivantesPropos des supports susceptibles d’être lus Manipulation des disques compacts CD/CD-R/CD-RW’attention des utilisateurs de disques CD-R ou CD-RW Mise en route Tuner Diminution rapide du volumeRéglage de l’heure Écoute de la radioLecture Préréglage manuel des stationsPréréglage automatique des stations Accord d’une station prérégléeRecherche à partir du CD-texte X. Lecture aléatoireLecture répétée La piste sélectionnée est lue immédiatement Recherche rapidePropos des fichiers MP3/WMA/AAC 10-FR11-FR TerminologieRéglage de la largeur de bande des graves Réglage de la commande des gravesRéglage du son Réglage de la fréquence centrale des gravesRéglage de la fréquence centrale des aigus Réglage de la commande des aigusRéglage du filtre passe-haut Activation/annulation de la correction physiologique14-FR Autres fonctionsAffichage du texte Affichage de l’heure15-FR Personnalisation du sonPersonnalisation de l’affichage 16-FR Appareil externeIPod compatibles avec cet appareil IPod en optionRecherche d’un morceau souhaité 17-FR18-FR Fonction de recherche directe19-FR Lecture aléatoire M.I.X20-FR InformationsEn cas de problème BaseLe son n’est pas reproduit par les enceintes Indication relative au mode iPodIndications pour le lecteur de CD 21-FR22-FR SpécificationsNE PAS Coincer LES Cables Avec DES Objets Voisins 23-FR24-FR Extrayez l’appareil, en le maintenant déverrouillé 25-FRDépose Voiture Japonaise26-FR Raccordements27-FR Page Garantie Limitée Índice Manual de instrucciones Advertencia Prudencia Precauciones Disco dañado Limpieza del productoTemperatura Condensación de humedadDiscos de forma irregular No intente realizar nunca lo siguienteInserción de los discos Discos nuevosAcerca de los soportes que se pueden reproducir Manejo de discos compactos CD/CD-R/CD-RWPara clientes que utilizan CD-R/CD-RW Primeros pasos Funcionamiento de la radio Reducción rápida del volumenAjuste de la hora Reproducción Almacenamiento manual de emisorasAlmacenamiento automático de emisoras Sintonía de emisoras memorizadasBúsqueda en texto de CD Repetición de reproducciónX. Reproducción aleatoria Se reproducirá inmediatamente la pista que ha seleccionado Búsqueda rápidaAcerca de MP3/WMA/AAC 10-ES11-ES TerminologíaAjuste del ancho de banda de graves Ajuste de sonidoAjuste del control de graves Ajuste de la frecuencia central de los gravesAjuste de la frecuencia central de los agudos Ajuste del control de agudosAjuste del filtro de paso alto Activación/desactivación del efecto de sonoridad14-ES Otras funcionesVisualización de texto Visualización de la hora15-ES Preferencias de sonidoPreferencias visuales 16-ES Dispositivo externoIPod que pueden utilizarse con esta unidad IPod opcionalBúsqueda de la canción deseada 17-ES17% 33% Función de búsqueda directa18-ES Ejemplo de búsqueda en modo Song19-ES Reproducción aleatoria M.I.X20-ES InformaciónEn caso de dificultad Cuestiones básicasNo sale el sonido por los altavoces Indicaciones para el reproductor de CDIndicación para el modo iPod 21-ES22-ES Especificaciones23-ES Ubicación y conexionesPrecaución Instalación24-ES Extraiga el panel frontal desmontable consulte la páginaVehículo Japonés 25-ESExtracción 26-ES Conexiones27-ES
Related manuals
Manual 31 pages 25.11 Kb

CDE-9873 specifications

The Alpine CDE-9873 is a premium in-car audio system designed for automotive enthusiasts seeking superior sound quality and advanced connectivity options. Known for its sleek design and user-friendly interface, the CDE-9873 seamlessly integrates high-performance audio technologies with modern conveniences.

One of the standout features of the CDE-9873 is its digital media playback capability. Supporting a variety of formats, including MP3, AAC, WMA, and WAV, users can enjoy their favorite tracks without compromising on sound quality. Additionally, the unit comes equipped with a 24-bit D/A converter that ensures precise audio reproduction, delivering crystal-clear sound across all frequencies.

Connectivity is a key focus of the CDE-9873. The device includes USB and AUX inputs, allowing users to connect their smartphones and other portable devices with ease. With built-in Bluetooth technology, the unit enables hands-free calling and wireless audio streaming, creating a safer driving experience while keeping you connected to your favorite music and calls.

The power output of the CDE-9873 is impressive, featuring a robust 18 watts RMS per channel, which allows for rich sound even at higher volume levels. This power can be further enhanced by the unit’s preamp outputs, giving users the flexibility to connect external amplifiers for a more powerful audio experience.

Another distinctive feature of the Alpine CDE-9873 is its customizable sound settings. The unit offers a 9-band graphic equalizer that allows users to fine-tune their sound preferences, while a built-in sound processor enhances audio clarity and balance. The Bass Engine technology further enriches low-frequency performance, making it an excellent choice for bass lovers.

The design of the CDE-9873 is both aesthetic and functional. With a vibrant display that is easy to read in various lighting conditions, user navigation is intuitive and simple. The controls are strategically placed for convenience, ensuring that drivers can operate the system without distraction.

In summary, the Alpine CDE-9873 combines cutting-edge audio technology with user-friendly features, making it an excellent choice for anyone looking to enhance their in-car audio experience. With its impressive sound quality, extensive connectivity options, and customizable settings, the CDE-9873 stands out in the crowded market of car audio systems, promising to elevate your driving experience to a new level.
Top Page Image Contents