Kenwood KDC-X597 While listening to any source, 15 to+15, 75/1.00/1.25 Adjusts the quality factor

Page 14

AUDIO SETTINGS

While listening to any source...

1Press the volume knob to enter [FUNGION].

2Turn the volume knob to select [AUDIO CONTROL]/ [AUDIO GRL], then press the knob.

3Turn the volume knob to make a selection (see the following table), then press the knob.

Repeat step 3 until the desired item is selected or activated.

4Press and hold~ to exit.

(orusingRC-406)~~~~~~~~~~~~~~~~~~~~

1Press AUD to enter [AUDIO CONTROL]/ [AUDIO GRL].

2Press JJrt../T to make a selection, then press ENT ........

To return to the previous hierarchy, press~.

 

 

Default: XX

SUB-W LEVEL

-15 to+15 (0):

Adjusts the subwoofer output level.

BASS LEVEL

-8to +8 (0):

 

-MIDLEVEL--------

=_8 t~ +B(m:____ Adju.sts the le~el to memorize for each source. (Before .

-------------------------

=-------

makmg an adjustment, select the source you want to adjust.)

TRE LEVEL

-8to +8 (0):

 

BASS ADJUST

BASS GR FRQ

60/80/ 100/200: Selects the center frequency.

 

-------------------------------------------

~

 

BASS LEVEL

-8to +8 (0): Adjusts the level.

 

-------------------------------------------------------------------------

 

BASS QFACTOR

1.00/1.25/1.50/2.00: Adjusts the quality factor.

 

BASS EXTEND

ON: Turns on the extended bass. ; OFF: Cancels.

MID ADJUST

MID GR FRQ

0.5K/1.0K/1.5K/2.5K: Selects the center frequency.

 

----------------------------------------------------------

 

MID LEVEL

-8to +8 (0): Adjusts the level.

 

MID QFAGOR

0.75/1.00/1.25: Adjusts the quality factor.

TRE ADJUST

TRE GR FRQ

1O.OK/12.5K/15.0K/17.5K: Selects the center

 

 

frequency.

 

TRE LEVEL

-8to +8 (0): Adjusts the level.

PRESET EQ

NATURAU USER/ ROCK/ POPS/ EASY/TOP40/ JAW POWERFUL: Selects

 

apreset equalizer suitable to the music genre. (Select [USER] to use the

 

customized bass, middle, and treble settings.)

BASS BOOST

B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass

 

boost level.; OFF: Cancels.

LOUDNESS

LOUDNESS LV1/ LOUD LV1/ LOUDNESS LV2/ LOUD LV2: Selects your

 

preferred low and high frequencies boost to produce awell-balancedsound at

 

alow volume level.; OFF: Cancels.

BALANCE

L15 to R15 (0): Adjusts the left and right speaker output balance.

FADER

R15 to F15 (0): Adjusts the rear and front speaker output balance.

SUBWOOFER

ON: Turns on the subwoofer output.; OFF: Cancels.

SETI SUB-WSET

 

HPF

THROUGH: All signals are sent to the speakers.; 100HZ/ 120HZ/

 

150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150Hz are

 

sent to the speakers.

LPF SUBWOOFER/ THROUGH: All signals are sent to the subwoofer.; 85HZ/ 120HZ/

LPF SUB-W

160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are

 

sent to the subwoofer.

SUB-W PHASE

REVERSE/ REV (180°)/ NORMAL/ NORM (0°): Selects the phase of

 

the subwoofer output to be in line with the speaker output for optimum

 

performance. (Selectable only if asetting other than [THROUGH] is selected

 

for [LPF SUBWOOFER]/ [LPF SUB-W].)

SUPREME SET

ON: Creates realistic sound by interpolating the high-frequencycomponents

 

that are lost in MP3/WMA audio compression.; OFF: Cancels. (Selectable only

 

when playing back an MP3/WMA disc or aUSB device, except iPhone/iPod.)

VOLUME OFFSET/

-8to +8 (for AUX); -8to 0 (for other sources): Presets the volume

VOL OFFSET

adjustment level of each source. (Before adjustment, select the source you

(Default: 0)

want to adjust.)

13•IIJI:iite1;.111: [SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/[SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (~ 4)

[SUB-W LEVEL]/ [LPF SUB-W]/[SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].

14

Image 14
Contents Made for JVC Kenwood CorporationFor your records GET0858-001 a KW/KOContents Faceplate Detach How to resetRemote control RC-406 Press t! SRC to enter Standby YES is selected for the initial setupTo return to the previous hierarchy, press~ Default Or alarm function is turned on DefaultPress Direct to enter Direct Access Tuning Press *AM- I #FM+ to select a bandKMC. -t16 Preparation Connect a portable audio player commercially availableAbout Pandora Button 3, 4 or 5 to storeButtons 1 to Displayed only when Mature CH is set to OffSeek Mode Selects the tuning method for the~ I~ buttons To exit from Replay and go to live, press~ or~ on RC-406Press the volume knob to start pairing You can operate Bluetooth devices using this unitSupported Bluetooth profiles Press~ to enter Bluetooth modeBluetooth mobile phone First menu Press~ to enter alphabet search modeKnob Abcdefghijk appears. To go to the otherSource switches and broadcast starts automatically STOREDappears when the contact is storedBluetooth on this unit Manual of the connected phone for detailsWhile listening to any source 00/1.25/1.50/2.00 Adjusts the quality factor75/1.00/1.25 Adjusts the quality factor Repeat until the desired item is selected or activatedRepeat until the desired item is selected or activated To return to the previous hierarchy, press~ DefaultOn Dims the display illumination. OFF Cancels Playable files About BluetoothAbout iPod/iPhone Unplayable discsProblem, consult your nearest service center Adjust the volume to the optimum levelCheck to be sure the terminals of the speaker wires are Problem, reset the unit.~Chan Unavail Reset the unit.-+No station is found Check AntennaiToXtA$tH 4 000 mV/10 kO DC 5V== 1A50Wx4 How to remove the unit Lnstallating the unit in-dash mounting Basic procedureWhen installing without the mounting sleeve LtottJi..1e1e11J Wiring connectionPart list for installation ~ @Rear outputPara cumplimiento de Ia Cofetel JVC Kenwood Customer Information Center MilitaryKenwood USA Corporation Kenwood Electronics Canada INC