Kenwood KDC-X597 Adjust the volume to the optimum level, Problem, reset the unit.~

Page 17

TROUBLESHOOTING

 

Sound cannot be heard.

Adjust the volume to the optimum level.

 

 

Check the cords and connections.

 

"PROTECT" appears and no

 

Check to be sure the terminals of the speaker wires are

 

operations can be done.

 

insulated properly, then reset the unit. If this does not solve

 

 

 

the problem, consult your nearest service center.

~--------------------------------------------------------------------------------------------------------------------------------------

 

 

Sound cannot be heard.

 

Clean the connectors.(~ 2}

The unit does not turn on.

 

 

"NO MUSIC" appears. "NA DEVICE" appears.

"USBERROR"appea~.

 

Connect aUSB device that contains playable audio files.

 

Connect asupported USB device, and check the

 

connections.

Remove the USB device, turn the unit off, then turn it on

 

again.

Try to connect another USB device.

Information shown on the display

 

 

 

is incorrect.

 

 

 

The unit does not work at all.

 

Reset the unit.(~ 3}

Radio reception is poor.

Connect the antenna firmly.

Static noise while listening to the

Pull the antenna out all the way.

 

radio.

 

 

 

"NA FilE" appears.

 

Make sure the media contains supported audio files.

 

 

 

(~ 16}

 

"NO DISC" appears.

 

Insert aplayable disc into the loading slot.

 

"TOC ERROR" appears.

 

Make sure the disc is clean and inserted properly.

-----------------------------------------------------------------------------------------

 

"PlEASE EJECT" I "PlS EJECT"

 

Reset the unit. If this does not solve the problem, consult

 

appears.

 

your nearest service center.

-------------------------------------------------------------------------

 

------------------------------~

 

Disc cannot be ejected.

 

Press and hold~ to forcibly eject the disc. Be careful not

 

 

 

to drop the disc when it is ejected. If this does not solve the

 

 

 

problem, reset the unit.(~ 3}

 

"READERROR"appea~.

 

Copy the files and folders onto the USB device again. If this

 

 

 

does not solve the problem, reset the USB device or use

 

 

 

another USB device.

 

"NO DEVICE" appears.

 

Connect aUSB device, and change the source to USB again.

-------------------------------------------

------------------------------------------------------------

~

 

"COPY PRO" appears.

 

Acopy-protected file is played.

"iPod ERROR" appears.

ReconnecttheiPod.

 

 

Reset the iPod.

 

Noise is generated.

 

Skip to another track or change the disc.

 

-------~--------------------------------------------

~-----------------------------------

~--------

Tracks do not play back as you

 

Playback order is determined when files

are recorded.

------------------------------------------------------------------------------------------------haveintended them to play.

 

·

"READING" keeps flashing.

 

Do not use too many hierarchical levels or folders.

Elapsed playing time is not correct.

 

This is caused by how the tracks are recorded.

--------------------------------------------------------------------------

The number of songs contained in

 

Podcast files are not counted on this unit as this unit does

the /ISONGS" category of this unit is

 

not support the playback of pod cast files.

different from the iPod/iPhone.

 

 

 

Correct characters are not

 

This unit can only display uppercase letters, numbers, and

displayed (e.g. album name).

 

alimited number of symbols.

 

ENGLISH

I

17

Image 17
Contents For your records JVC Kenwood CorporationMade for GET0858-001 a KW/KOContents Faceplate Detach How to resetRemote control RC-406 Press t! SRC to enter Standby YES is selected for the initial setupTo return to the previous hierarchy, press~ Default Press Direct to enter Direct Access Tuning DefaultOr alarm function is turned on Press *AM- I #FM+ to select a bandKMC. -t16 Connect a portable audio player commercially available PreparationButton 3, 4 or 5 to store About PandoraSeek Mode Selects the tuning method for the~ I~ buttons Displayed only when Mature CH is set to OffButtons 1 to To exit from Replay and go to live, press~ or~ on RC-406Supported Bluetooth profiles You can operate Bluetooth devices using this unitPress the volume knob to start pairing Press~ to enter Bluetooth modeBluetooth mobile phone Knob Press~ to enter alphabet search modeFirst menu Abcdefghijk appears. To go to the otherBluetooth on this unit STOREDappears when the contact is storedSource switches and broadcast starts automatically Manual of the connected phone for details75/1.00/1.25 Adjusts the quality factor 00/1.25/1.50/2.00 Adjusts the quality factorWhile listening to any source Repeat until the desired item is selected or activatedRepeat until the desired item is selected or activated To return to the previous hierarchy, press~ DefaultOn Dims the display illumination. OFF Cancels About iPod/iPhone About BluetoothPlayable files Unplayable discsCheck to be sure the terminals of the speaker wires are Adjust the volume to the optimum levelProblem, consult your nearest service center Problem, reset the unit.~No station is found Reset the unit.-+Chan Unavail Check AntennaiToXtA$tH 4 000 mV/10 kO DC 5V== 1A50Wx4 How to remove the unit Lnstallating the unit in-dash mounting Basic procedureWhen installing without the mounting sleeve Part list for installation Wiring connectionLtottJi..1e1e11J ~ @Rear outputPara cumplimiento de Ia Cofetel Military JVC Kenwood Customer Information CenterKenwood Electronics Canada INC Kenwood USA Corporation