Kenwood KDC-X597 YES is selected for the initial setup, Press t! SRC to enter Standby

Page 4

GETTING STARTED

When you turn on the power (or after you reset the unit), the display

shows: //CANCEL DEMO''.. //PRESS// .. 'VOLUMEKNOB//

1Press the volume knob.

[YES] is selected for the initial setup.

2Press the volume knob again. //DEMO OFF// appears.

1Press the volume knob to enter [FUNOION).

2Turn the volume knob to select [SETTINGS], then press the knob.

3Turn the volume knob to select [CLOCK], then press the knob.

4Turn the volume knob to select [CLOCK ADJUST]/ [CLOCK ADJ], then press the knob.

5Turn the volume knob to adjust the hour, then press the knob.

6Turn the volume knob to adjust the minute, then press the knob. Press~ I~ to move between the hour and minute adjustment.

7Press and hold ~ to exit.

(or) ------------------------------------------~

Press and hold SCRL DISP to enter clock adjustment mode directly while in clock display screen.

Then, perform steps 5 and 6 above to set the clock.

1Press t!> SRC to enter [STANDBY).

2Press the volume knob to enter [FUNOION).

3Turn the volume knob to select [INITIAL SET), then press the knob.

4Turn the volume knob to make a selection (see the following table), then

press the knob.

5Press and hold~ to exit.

To return to the previous hierarchy, press~.

Default: XX

PRESET TYPE

NORMAL/ NORM: Memorizes one station for each preset button in each band (FM1/

 

FM2/ FM3/ AM).; MIX: Memorizes one station or SiriusXM channel for each preset

 

button regardless of the selected band or SiriusXM channel.

KEY BEEP

ON: Activates the keypress tone. ; OFF: Deactivates.

PANDORASRC

13•Iti!Jett4t •~olii:Jie1e1e11J:

 

ON: Enables PANDORA in source selection.; OFF: Disables.(~ 8)

BUILT-IN AUX/

ON: Enables AUXin source selection.; OFF: Disables.(~ 7)

BUILTIN AUX

 

CD READ

1: Automatically distinguishes between audio file disc and music CD.; 2: Forces to play

 

as amusic CD. No sound can be heard if an audio file disc is played.

SWITCH PRE

l:i•M:iite1e11l:

 

REAR/ SUB-W:Selects whether rear speakers or asubwoofer are connected to the

 

line out terminals on the rear (through an external amplifier).

SP SELECT

OFF/ 5/4/ 6 x 9/6/ OEM: Selects according to the speaker size (5 inches or

 

4 inches, 6x9 inches or 6 inches) or OEM speakers for optimum performance.

F/W UP xx.xx

YES: Starts upgrading the firmware.; NO: Cancels (upgrading is not activated).

 

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

4

Image 4
Contents JVC Kenwood Corporation For your recordsMade for GET0858-001 a KW/KOContents Remote control RC-406 Detach How to resetFaceplate To return to the previous hierarchy, press~ Default YES is selected for the initial setupPress t! SRC to enter Standby Default Press Direct to enter Direct Access TuningOr alarm function is turned on Press *AM- I #FM+ to select a bandKMC. -t16 Preparation Connect a portable audio player commercially availableAbout Pandora Button 3, 4 or 5 to storeDisplayed only when Mature CH is set to Off Seek Mode Selects the tuning method for the~ I~ buttonsButtons 1 to To exit from Replay and go to live, press~ or~ on RC-406You can operate Bluetooth devices using this unit Supported Bluetooth profilesPress the volume knob to start pairing Press~ to enter Bluetooth modeBluetooth mobile phone Press~ to enter alphabet search mode KnobFirst menu Abcdefghijk appears. To go to the otherSTOREDappears when the contact is stored Bluetooth on this unitSource switches and broadcast starts automatically Manual of the connected phone for details00/1.25/1.50/2.00 Adjusts the quality factor 75/1.00/1.25 Adjusts the quality factorWhile listening to any source Repeat until the desired item is selected or activatedOn Dims the display illumination. OFF Cancels To return to the previous hierarchy, press~ DefaultRepeat until the desired item is selected or activated About Bluetooth About iPod/iPhonePlayable files Unplayable discsAdjust the volume to the optimum level Check to be sure the terminals of the speaker wires areProblem, consult your nearest service center Problem, reset the unit.~Reset the unit.-+ No station is foundChan Unavail Check Antennai50Wx4 DC 5V== 1AToXtA$tH 4 000 mV/10 kO When installing without the mounting sleeve Lnstallating the unit in-dash mounting Basic procedureHow to remove the unit Wiring connection Part list for installationLtottJi..1e1e11J ~ @Rear outputPara cumplimiento de Ia Cofetel JVC Kenwood Customer Information Center MilitaryKenwood USA Corporation Kenwood Electronics Canada INC