Caution:
The device is distinguished by a high degree of output. During operation, this results in a strong heat generation. Therefore no cables or other parts may adjoin the device. If their insulation melts, there is the risk of a short circuit or fire.
Note:
The connection 8.3 shown in illustr. 8.3 with the symbol 
has to be connected to the parking brake or other suitable components of the vehicle in such a way that the video playback of the device is interrupted for the driver while the vehicle is in motion. Please consider that your insurance coverage may be restricted or exempted otherwise. Please consult a specialist in your area if you have any questions about the connections.
8.2Connecting the antenna
The device is designed for antennas with an impedance of 75 Ω. To connect the antenna, plug the antenna cable into the antenna socket of the device (socket 
on the rear of the device).
8.3Supply voltage ISO plug A:
A2 (orange): Connection to the reverse light to switch on the rear view camera when the reverse gear is put in.
A4 (yellow): Connection for +12V operational voltage (diameter at least 2.5 mm²) to terminal # 30 (permanent plus) of the vehicle.
17