Silvercrest CDV-710 Menu settings level, Changing the bass settings Bass

Deutsch

English

20 Menu settings level 1

By briefly pressing the volume control dial once or several times, the functions of menu level 1, volume control, bass setting, treble setting, and the speaker balance between the left and right as well as front and rear speaker groups can be selected and set.

20.1 Changing the bass settings (BASS)

Pressing the control dial twice will result in reaching the bass settings. The message “BAS” will appear on the display together with the current level (e.g. B. “+2”). To change the bass bandwidth, turn the control dial clockwise or counter-clockwise. The bandwidth can be set in a range between “-7” and “+7”. It can be changed in increments of one.

The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic memory (don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial , you will reach the next possible setting. If you use the automatic memory, the device will return to the standard display.

20.2 Changing the treble settings (TREBLE)

After pressing the control dial twice, the treble setting (TREBLE) can be reached. The message “TRE” will appear on the display together with the current level (e.g. “0”). To change the bandwidth of the treble, turn the control dial clockwise or counter-clockwise. The bandwidth can be set in a range between “-7” and “+7”. It can be changed in increments of one.

The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic storage (don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial , you will reach the next possible setting. If you use the automatic memory, the device will return to the standard display.

52