The setting is saved either when the desired value is confirmed by pressing the control dial 
or through automatic memory (don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial 
, you will reach the next possible setting. If you use the automatic memory, the device will return to the standard display.
Note:
This setting only affects the radio mode and can only be carried out while the radio mode is active.
21.4 CT function to set the time of day
To set or change the time settings, press the control dial 
until you get to menu level 2. The “LOC” function will appear. Press the control dial 
repeatedly until you get to the menu item “CT”. There you have the option of setting the time of the device by turning the dial. Turning to the right changes the number of the hours, turning to the left, the minutes.
The setting is saved either when the desired value is confirmed by pressing the control dial 
or through automatic memory (don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial 
, you will reach the next possible setting. If you use the automatic memory, the device will return to the standard display.
Note:
If the device receives an RDS station with an RDS time signal, the clock will be automatically updated in particular intervals.
Deutsch English
57